33530F
1.INSTALL FLOOR SHIFT LEVER ASSEMBLY
Install the floor shift lever assembly with the 4 bolts.
33820B
2.INSTALL TRANSMISSION CONTROL CABLE ASSEMBLY
| *1 | Transmission Control Cable Assembly Lock |
| *a | Projecting Part |
Install the transmission control cable assembly to the floor shift lever assembly.
The projecting part of the transmission control cable assembly should face upward when connected.
After installation, make sure that the transmission control cable assembly lock is projecting from A as shown in the illustration.
Install the transmission control shift cable to the floor shift lever assembly.
Install the transmission control select cable to the floor shift lever assembly with a new clip.
3.ADJUST TRANSMISSION CONTROL SELECT CABLE
58995A
4.INSTALL NO. 1 CONSOLE BOX MOUNTING BRACKET
Install the No. 1 console box mounting bracket with the 2 screws.
Engage the 2 clips.
58861B
5.INSTALL NO. 1 CONSOLE BOX DUCT
58816B
6.INSTALL CONSOLE BOX INSERT
58817A
7.INSTALL FRONT NO. 2 CONSOLE BOX INSERT
55303B
8.INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY
55607
9.INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
55317A
10.INSTALL INSTRUMENT SIDE PANEL RH
62311B
11.INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP RH
62111A
12.INSTALL COWL SIDE TRIM SUB-ASSEMBLY RH
67911B
13.INSTALL FRONT DOOR SCUFF PLATE RH
58804A
14.INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY
58916
15.INSTALL BOX BOTTOM MAT
16.INSTALL LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL ASSEMBLY
53601
17.CONNECT HOOD LOCK CONTROL LEVER SUB-ASSEMBLY
55410C
18.INSTALL INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY
55650
19.INSTALL NO. 1 INSTRUMENT PANEL REGISTER ASSEMBLY
55474C
20.INSTALL NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH
55318C
21.INSTALL INSTRUMENT SIDE PANEL LH
62312B
22.INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP LH
62112A
23.INSTALL COWL SIDE TRIM SUB-ASSEMBLY LH
67914
24.INSTALL FRONT DOOR SCUFF PLATE LH
58910C
25.INSTALL REAR CONSOLE BOX ASSEMBLY