Home › Brake › PARKING BRAKE › PARKING BRAKE LEVER › 2011.10–2013.07
RM19V0EQ _54 Brake _014595 PARKING BRAKE _0074058 PARKING BRAKE LEVER A

PARKING BRAKE  PARKING BRAKE LEVER  INSTALLATION  


PROCEDURE

Hide 46201E 1.INSTALL PARKING BRAKE LEVER SUB-ASSEMBLY

a.
C240912

Install the parking brake lever sub-assembly with the 2 bolts.

Torque:
46 N*m (468 kgf*cm, 34 ft.*lbf)


b.
C240911

Connect the parking brake switch connector.


c.
C240908C01
2.531,1.354 2.281,1.354 false 2.76,1.458 2.99,1.458 false 2.135,1.271 2.292,1.448 0.156,0.177 10 true *1 3,1.375 3.26,1.583 0.26,0.208 10 true *2
*1 Lock Nut
*2 Adjusting Nut


Temporarily install the lock nut.

HINT:

After adjusting parking brake pedal travel, tighten the lock nut.



Hide 46341 2.INSTALL PARKING BRAKE EQUALIZER

a.
C246292
0.771,2.531 1.448,2.531 false 0.771,2.74 1.656,2.74 false 0.781,2.958 1.479,2.958 false 0.625,2.875 1.031,3.167 0.406,0.292 10 false *3 0.615,2.656 1.031,2.865 0.417,0.208 10 false *2 0.604,2.448 1.177,2.708 0.573,0.26 10 false *1
*1 No. 1 Parking Brake Cable Assembly
*2 Rubber Boot
*3 Parking Brake Equalizer


Install the parking brake equalizer to the No. 1 parking brake cable assembly.


b.

Slide the parking brake equalizer and rubber boot as shown in the illustration.

NOTICE:

Make sure that the rubber boot is securely inserted into the groove of the No. 1 parking brake cable assembly.



c.
C240910
2.083,1.021 2.604,1.021 false 1.281,1.688 1.865,1.688 false 2.656,0.927 2.969,1.156 0.313,0.229 10 false *1 1.115,1.604 1.458,1.854 0.344,0.25 10 false *2
*1 No. 2 Parking Brake Cable Assembly
*2 No. 3 Parking Brake Cable Assembly


Connect the No. 3 parking brake cable assembly to the parking brake equalizer.


d.

Connect the No. 2 parking brake cable assembly to the parking brake equalizer.


Hide 3.INSTALL FRONT SEAT ASSEMBLY LH

Hide 58910C 4.INSTALL REAR CONSOLE BOX ASSEMBLY

Hide 5.ADJUST PARKING BRAKE LEVER TRAVEL

Hide 6.INSPECT BRAKE WARNING LIGHT