Home › Vehicle Interior › HEATING / AIR CONDITIONING › AIR CONDITIONING PANEL(for Automatic Air Conditioning System) › 2011.10–2014.05
RM19V0EQ _58 Vehicle Interior _014613 HEATING / AIR CONDITIONING _0074187 AIR CONDITIONING PANEL(for Automatic Air Conditioning System) A

HEATING / AIR CONDITIONING  AIR CONDITIONING PANEL(for Automatic Air Conditioning System)  REMOVAL  


PROCEDURE

Hide 1. PRECAUTION

NOTICE:

After turning the ignition switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notices before proceeding with work.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION


Hide 2.DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL (w/ Navigation System)

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION


Hide 3.REMOVE REAR CONSOLE BOX ASSEMBLY

Hide 4.REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY

Hide 55660 5.REMOVE NO. 2 INSTRUMENT PANEL REGISTER ASSEMBLY

Hide 58804A 7.REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY

Hide 8.REMOVE RADIO RECEIVER ASSEMBLY WITH AIR CONDITIONING CONTROL ASSEMBLY (w/o Navigation System)

Hide 9.REMOVE NAVIGATION RECEIVER ASSEMBLY WITH AIR CONDITIONING CONTROL ASSEMBLY (w/ Navigation System)

Hide 86211 10.REMOVE NO. 1 RADIO BRACKET (w/o Navigation System)

Hide 86212 11.REMOVE NO. 2 RADIO BRACKET (w/o Navigation System)

Hide 86211J 12.REMOVE NO. 1 RADIO RECEIVER BRACKET (w/ Navigation System)

Hide 86212C 13.REMOVE NO. 2 RADIO RECEIVER BRACKET (w/ Navigation System)

Hide 55900 14.REMOVE AIR CONDITIONING CONTROL ASSEMBLY

a.
E227523

Disengage the 4 clips and guide, and remove the air conditioning control assembly as shown in the illustration.