Use the same procedure for the RH and LH sides.
The procedure described below is for the LH side.
84234
1.INSTALL REAR DOOR COURTESY LIGHT SWITCH ASSEMBLY
Using a T30 "TORX" socket wrench, install the rear door courtesy light switch assembly with the screw.
There are 2 diameters for the "TORX" screws: 6 mm (0.236 in.) and 7 mm (0.276 in.). The diameter of a supplied "TORX" screw is 7 mm (0.276 in.).
Connect the connector.
2.INSTALL REAR SEATBACK ASSEMBLY (for Fixed Seat Type)
72693
3.INSTALL REAR SEAT CUSHION LOCK HOOK (for Fixed Seat Type)
4.INSTALL REAR SEAT CUSHION ASSEMBLY (for Fixed Seat Type)
5.INSTALL REAR SIDE SEATBACK ASSEMBLY (for Fold Down Seat Type)
72693
6.INSTALL REAR SEAT CUSHION LOCK HOOK (for Fold Down Seat Type)
7.INSTALL REAR SEAT CUSHION ASSEMBLY (for Fold Down Seat Type)