Home › Vehicle Interior › SEAT › FRONT SEAT ASSEMBLY(for Power Seat)
RM19V0EQ _58 Vehicle Interior _014611 SEAT _0074162 FRONT SEAT ASSEMBLY(for Power Seat) A

SEAT  FRONT SEAT ASSEMBLY(for Power Seat)  REASSEMBLY  


PROCEDURE

Hide 72760D 1.INSTALL LUMBAR SUPPORT ADJUSTER ASSEMBLY (for Driver Side)

Hide 71054S 2.INSTALL FRONT SEATBACK SPRING SUB-ASSEMBLY (for Front Passenger Side)

a.

Install the 2 front seatback hooks to the front seatback spring sub-assembly.


b.

Engage the 2 guides to install the front seatback spring sub-assembly to the front seatback frame sub-assembly.


c.

Engage the 4 claws.


Hide 71587B 3.INSTALL FRONT SEATBACK EDGE PROTECTOR

a.

Engage each claw to install the 2 front seatback edge protectors to the front seatback frame sub-assembly.


Hide 71640S 4.INSTALL SEPARATE TYPE FRONT SEATBACK SPRING ASSEMBLY

a.

Engage the 4 guides to install the separate type front seatback spring assembly to the front seat frame with adjuster assembly.


b.

Install the 4 bolts.

Torque:
42 N*m (428 kgf*cm, 31 ft.*lbf)


Hide 8219B 5.INSTALL FRONT NO. 2 SEAT WIRE

a.

Connect the connectors and engage the wire harness clamps to install the front No. 2 seat wire.


Hide 82192 6.INSTALL FRONT SEAT WIRE

a.

Connect the connectors and engage the wire harness clamps to install the front seat wire.


Hide 71538B 7.INSTALL FRONT SEAT CUSHION EDGE PROTECTOR LH (for Driver Side)

a.

Engage the 3 claws to install the front seat cushion edge protector LH.


b.

Install the screw.


Hide 71537G 8.INSTALL FRONT SEAT CUSHION EDGE PROTECTOR RH (for Driver Side)

a.

Engage the 3 claws to install the front seat cushion edge protector RH.


b.

Install the screw.


Hide 71538B 9.INSTALL FRONT SEAT CUSHION EDGE PROTECTOR LH (for RHD Front Passenger Side)

a.

Engage the 3 claws to install the front seat cushion edge protector LH.


b.

Install the screw.


Hide 71537G 10.INSTALL FRONT SEAT CUSHION EDGE PROTECTOR RH (for RHD Front Passenger Side)

a.

Engage the 3 claws to install the front seat cushion edge protector RH.


b.

Install the screw.


Hide 71876G 11.INSTALL RECLINING ADJUSTER INSIDE COVER LH

a.

Engage the 2 guides to install the reclining adjuster inside cover LH.


Hide 71875F 12.INSTALL RECLINING ADJUSTER INSIDE COVER RH

a.

Engage the 2 guides to install the reclining adjuster inside cover RH.


Hide 71874 13.INSTALL FRONT SEAT LOWER CUSHION SHIELD LH (for Driver Side)

a.
B281121

Engage the clip to install the front seat lower cushion shield LH.


b.

Engage the hook as shown in the illustration.


c.

Install the screw.


Hide 71873 14.INSTALL FRONT SEAT LOWER CUSHION SHIELD RH (for Driver Side)

a.
B288609

Engage the clip to install the front seat lower cushion shield RH.


b.

Engage the hook as shown in the illustration.


c.

Install the screw.


Hide 71074S 15.INSTALL SEPARATE TYPE FRONT SEATBACK COVER

a.
B288607

Using hog ring pliers, install the separate type front seatback cover to the separate type front seatback pad with 8 new hog rings.

NOTICE:
·

Be careful not to damage the separate type front seatback cover.

·

Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the separate type front seatback cover.




Hide 73920A 16.INSTALL FRONT SEAT AIRBAG ASSEMBLY (w/ Front Seat Side Airbag)

Hide 17.INSTALL SEPARATE TYPE FRONT SEATBACK COVER WITH PAD

a.

Temporarily install the separate type front seatback cover with pad.


b.

w/ Front Seat Side Airbag:

i.

Install the 3 brackets with the 2 nuts.

Torque:
5.5 N*m (56 kgf*cm, 49 in.*lbf)

CAUTION:
·

For vehicles with a front seat airbag assembly, the separate type front seatback cover must be securely installed. Otherwise, the front seat airbag assembly may not deploy properly.

·

Make sure that the strap is not twisted after installing the nut.

·

Install the bracket securely.





c.

Engage the 4 claws to install the 2 front seat headrest supports.


d.
B281114

Using hog ring pliers, install 3 new hog rings.

NOTICE:
·

Be careful not to damage the separate type front seatback cover.

·

Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the separate type front seatback cover.




e.
B270269

Close the 2 fasteners.


f.
B281111

Using hog ring pliers, install 5 new hog rings.

NOTICE:
·

Be careful not to damage the separate type front seatback cover.

·

Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the separate type front seatback cover.




Hide 71072S 18.INSTALL SEPARATE TYPE FRONT SEAT CUSHION COVER

a.
B297961

Using hog ring pliers, install the separate type front seat cushion cover to the separate type front seat cushion pad with 18 new hog rings.

NOTICE:
·

Be careful not to damage the separate type front seat cushion cover.

·

Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the separate type front seat cushion cover.




b.
B307508

Using hog ring pliers, install 2 new hog rings.

NOTICE:
·

Be careful not to damage the separate type front seat cushion cover.

·

Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the separate type front seat cushion cover.




Hide 19.INSTALL SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD

a.

Temporarily install the separate type front seat cushion cover with pad.


b.

Engage each hook.


c.

for RHD Front Passenger Side:

i.
B270301

Engage the clamp to connect the connector as shown in the illustration.



d.

w/ Front Seat Side Airbag:

i.

Engage the fastener to secure the front seat airbag assembly wire harness.



Hide 71862 20.INSTALL FRONT SEAT INNER CUSHION SHIELD (for Driver Side)

a.

Engage the 5 claws and 6 guides to install the front seat inner cushion shield.


Hide 71861 21.INSTALL FRONT SEAT INNER CUSHION SHIELD (for RHD Front Passenger Side)

a.

Engage the 5 claws and 7 guides to install the front seat inner cushion shield.


Hide 84922A 22.INSTALL FRONT LUMBAR POWER SEAT SWITCH (for Driver Side)

Hide 84922C 23.INSTALL FRONT POWER SEAT SWITCH (w/o Seat Position Memory System)

Hide 84070 24.INSTALL POSITION CONTROL ECU AND SWITCH ASSEMBLY (w/ Seat Position Memory System)

Hide 71812D 25.INSTALL FRONT SEAT CUSHION SHIELD (for Driver Side)

a.

Connect the front lumbar power seat switch connector.


b.

w/o Seat Position Memory System:

i.

Connect the connector to the front power seat switch.



c.

w/ Seat Position Memory System:

i.

Connect the 2 connectors to the position control ECU and switch assembly.



d.

Engage the 2 wire harness clamps.


e.

Install the wire harness to the wire harness cover.


f.

Engage the 2 claws to close the wire harness cover.


g.

Engage the 4 claws, 7 guides and clip to install the front seat cushion shield.


Hide 71811D 26.INSTALL FRONT SEAT CUSHION SHIELD (for RHD Front Passenger Side)

a.

Connect the front power seat switch connector.


b.

Engage the 2 wire harness clamps.


c.

Install the wire harness to the wire harness cover.


d.

Engage the 3 claws to close the wire harness cover.


e.

Engage the 4 claws, 8 guides and clip to install the front seat cushion shield.


Hide 71868A 27.INSTALL FRONT NO. 1 SEAT INNER CUSHION SHIELD

a.
B269623

Install the clip.


b.
B288586

Engage the 3 claws and 3 guides to install the front No. 1 seat inner cushion shield as shown in the illustration.


c.
B288587

Engage the 2 claws to install the front No. 1 seat inner cushion shield to the clip as shown in the illustration.


d.

Install the screw.


Hide 71074S 28.CONNECT SEPARATE TYPE FRONT SEATBACK COVER

a.

Connect the rubber band of the separate type front seatback cover.


Hide 84921A 29.INSTALL RECLINING POWER SEAT SWITCH KNOB

a.

Engage the 4 claws to install the reclining power seat switch knob.


Hide 84921B 30.INSTALL SLIDE AND VERTICAL POWER SEAT SWITCH KNOB

a.

Engage the 4 claws to install the slide and vertical power seat switch knob.


Hide 71849 31.INSTALL SEAT ADJUSTER COVER CAP

a.

Install the 2 seat adjuster cover caps.


Hide 73240 32.INSTALL FRONT SEAT INNER BELT ASSEMBLY (for Driver Side)

Hide 73230 33.INSTALL FRONT SEAT INNER BELT ASSEMBLY (for RHD Front Passenger Side)