Home › Vehicle Interior › SEAT › POWER SEAT SWITCH(w/ Seat Position Memory System)
RM19V0EQ _58 Vehicle Interior _014611 SEAT _0074170 POWER SEAT SWITCH(w/ Seat Position Memory System) A

SEAT  POWER SEAT SWITCH(w/ Seat Position Memory System)  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:

Perform the same procedure as for the LH side.


PROCEDURE

Hide 84070 1.INSTALL POSITION CONTROL ECU AND SWITCH ASSEMBLY

a.

Install the position control ECU and switch assembly to the front seat cushion shield RH with the 3 screws.


Hide 71811D 2.INSTALL FRONT SEAT CUSHION SHIELD RH

a.

Connect the front lumbar power seat switch connector.


b.

Connect the 2 connectors to the position control ECU and switch assembly.


c.

Engage the 2 wire harness clamps.


d.

Install the wire harness to the wire harness cover.


e.

Engage the 2 claws to close the wire harness cover.


f.

Engage the 4 claws, 7 guides and clip to install the front seat cushion shield RH.


Hide 71867A 3.INSTALL NO. 1 FRONT SEAT INNER CUSHION SHIELD RH

Hide 71074S 4.CONNECT SEPARATE TYPE FRONT SEATBACK COVER

Hide 84921A 5.INSTALL RECLINING POWER SEAT SWITCH KNOB

Hide 84921B 6.INSTALL SLIDE AND VERTICAL POWER SEAT SWITCH KNOB