72604
1.INSTALL REAR SEATBACK LOCK SUB-ASSEMBLY LH
Install the rear seatback lock sub-assembly LH with the 2 nuts.
Engage the hook in the order indicated in the illustration.
72603
2.INSTALL REAR SEATBACK LOCK SUB-ASSEMBLY RH
Use the same procedure as for the LH side.
64271G
3.INSTALL ROOM PARTITION BOARD RH
Engage the 5 clips to install the room partition board RH.
Install the 2 clips.
64272B
4.INSTALL ROOM PARTITION BOARD LH
Engage the 4 clips, 2 claws and guide to install the room partition board LH.
64330D
5.INSTALL PACKAGE TRAY TRIM PANEL ASSEMBLY (w/o Rear Sunshade)
64330D
6.INSTALL PACKAGE TRAY TRIM PANEL ASSEMBLY (w/ Rear Sunshade)
73373F
7.INSTALL REAR SEAT SHOULDER BELT HOLE COVER
62472A
8.INSTALL ROOF SIDE INNER GARNISH LH
62471A
9.INSTALL ROOF SIDE INNER GARNISH RH
Use the same procedure as for the LH side.
62332A
10.INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH
62331A
11.INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP RH
73370C
12.CONNECT REAR NO. 1 SEAT OUTER BELT ASSEMBLY LH
73360C
13.CONNECT REAR NO. 1 SEAT OUTER BELT ASSEMBLY RH
14.INSTALL REAR SEATBACK ASSEMBLY LH
15.INSTALL REAR SEATBACK ASSEMBLY RH
16.INSTALL REAR SIDE SEATBACK ASSEMBLY LH
17.INSTALL REAR SIDE SEATBACK ASSEMBLY RH
73480
18.CONNECT REAR SEAT INNER WITH CENTER BELT ASSEMBLY LH (for LHD)
73480
19.CONNECT REAR SEAT INNER WITH CENTER BELT ASSEMBLY LH (for RHD)
72693
20.INSTALL REAR SEAT CUSHION LOCK HOOK
21.INSTALL REAR SEAT CUSHION ASSEMBLY