73480
1.INSPECT REAR SEAT INNER WITH CENTER BELT ASSEMBLY LH
73480
2.INSTALL REAR SEAT INNER WITH CENTER BELT ASSEMBLY LH
Engage the guide to temporarily install the rear seat inner with center belt assembly LH.
Install the bolt.
Check if the ELR locks.
The check should be performed with the rear seat inner with center belt assembly LH installed.
With the belt assembly installed, check that the belt locks when it is pulled out quickly.
64330D
3.INSTALL PACKAGE TRAY TRIM PANEL ASSEMBLY (w/o Rear Sunshade)
64330
4.INSTALL PACKAGE TRAY TRIM PANEL ASSEMBLY (w/ Rear Sunshade)
73373F
5.INSTALL REAR SEAT SHOULDER BELT HOLE COVER
62472A
6.INSTALL ROOF SIDE INNER GARNISH LH
62471A
7.INSTALL ROOF SIDE INNER GARNISH RH
Use the same procedure as for the LH side.
62332A
8.INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH
62331A
9.INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP RH
73370C
10.CONNECT REAR NO. 1 SEAT OUTER BELT ASSEMBLY LH
73360C
11.CONNECT REAR NO. 1 SEAT OUTER BELT ASSEMBLY RH
12.INSTALL REAR SEATBACK ASSEMBLY (for Fixed Seat Type)
13.INSTALL REAR SIDE SEATBACK ASSEMBLY LH (for Fold Down Seat Type)
14.INSTALL REAR SIDE SEATBACK ASSEMBLY RH (for Fold Down Seat Type)
73480
15.CONNECT REAR SEAT INNER WITH CENTER BELT ASSEMBLY LH (for LHD)
| *1 | Protruding Part |
Connect the floor anchor of the rear seat inner with center belt assembly LH with the bolt.
Install the rear seat inner with center belt assembly LH with the arrow on the anchor part facing the front of the vehicle.
Do not allow the anchor part of the rear seat inner with center belt assembly LH to overlap the protruding parts of the floor panel.
73480
16.CONNECT REAR SEAT INNER WITH CENTER BELT ASSEMBLY LH (for RHD)
| *1 | Protruding Part |
Connect the floor anchor of the rear seat inner with center belt assembly LH with the bolt.
Install the rear seat inner with center belt assembly LH with the arrow on the anchor part facing the front of the vehicle.
Do not allow the anchor part of the rear seat inner with center belt assembly LH to overlap the protruding parts of the floor panel.
Engage the clamp.
Connect the connector.
73470B
17.INSTALL REAR SEAT INNER WITH CENTER BELT ASSEMBLY RH (for LHD)
| *1 | Protruding Part |
Install the rear seat inner with center belt assembly RH with the bolt.
Install the rear seat inner with center belt assembly RH with the arrow on the anchor part facing the front of the vehicle.
Do not allow the anchor part of the rear seat inner with center belt assembly RH to overlap the protruding parts of the floor panel.
73470B
18.INSTALL REAR SEAT INNER WITH CENTER BELT ASSEMBLY RH (for RHD)
| *1 | Protruding Part |
Install the rear seat inner with center belt assembly RH with the bolt.
Install the rear seat inner with center belt assembly RH with the arrow on the anchor part facing the front of the vehicle.
Do not allow the anchor part of the rear seat inner with center belt assembly RH to overlap the protruding parts of the floor panel.
Engage the clamp.
Connect the 2 connectors.
72693
19.INSTALL REAR SEAT CUSHION LOCK HOOK (for Fixed Seat Type)
20.INSTALL REAR SEAT CUSHION ASSEMBLY (for Fixed Seat Type)
72693
21.INSTALL REAR SEAT CUSHION LOCK HOOK (for Fold Down Seat Type)
22.INSTALL REAR SEAT CUSHION ASSEMBLY (for Fold Down Seat Type)