Use the same procedure for the RH and LH sides.
The procedure described below is for the LH side.
1.REMOVE REAR BUMPER ASSEMBLY
64711
2.REMOVE LUGGAGE COMPARTMENT FLOOR MAT
58387
3.REMOVE REAR FLOOR FINISH PLATE
64725D
4.REMOVE NO. 1 LUGGAGE COMPARTMENT TRIM HOOK
64722
5.REMOVE LUGGAGE COMPARTMENT INNER TRIM COVER
6.REMOVE REAR COMBINATION LIGHT ASSEMBLY
Disconnect each connector.
Disengage the clamp.
Remove the 4 nuts and rear combination light assembly.