Home › Audio / Visual / Telematics › PARK ASSIST / MONITORING › BLIND SPOT MONITOR SYSTEM › from 2015.04
RM19V0EQ _56 Audio / Visual / Telematics _014601 PARK ASSIST / MONITORING _0074094 BLIND SPOT MONITOR SYSTEM T

PARK ASSIST / MONITORING  BLIND SPOT MONITOR SYSTEM  PROBLEM SYMPTOMS TABLE  


HINT:
·

Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.

·

Inspect the fuses and relays related to this system before inspecting the suspected areas below.



Entire System
Symptom Suspected Area Link
System does not operate at all (both the blind spot monitor function and RCTA function do not operate) Proceed to "Power Source Circuit" Click here
Proceed to "Main Switch Circuit" Click here
Blind spot monitor sensor RH Click here
System cannot be turned off Proceed to "Main Switch Circuit" Click here
Blind spot monitor sensor RH Click here
"BSM not available" or "Check BSM System" is displayed on the multi-information display Check abnormality history Click here
Blind spot monitor sensor RH Click here
Blind spot monitor sensor LH Click here
Combination meter assembly Click here

Blind Spot Monitor Function
Symptom Suspected Area Link
Outer rear view mirror indicator RH does not illuminate Proceed to "Blind Spot Monitor Beam Axis Confirmation" Click here
Outer rear view mirror RH Click here
Outer mirror control ECU assembly RH Click here
Outer rear view mirror assembly RH Click here
Blind spot monitor sensor RH Click here
Outer rear view mirror indicator LH does not illuminate Confirm beam axis display Click here
Outer rear view mirror LH Click here
Outer rear view mirror assembly LH Click here
Outer mirror control ECU assembly LH Click here
Blind spot monitor sensor LH Click here
Outer rear view mirror indicator RH remains illuminated Perform beam axis inspection Click here
Blind spot monitor sensor RH Click here
Outer rear view mirror indicator LH remains illuminated Perform beam axis inspection Click here
Blind spot monitor sensor LH Click here
Outer rear view mirror indicator RH does not flash Proceed to "Turn indicator light malfunction" in Problem Symptoms Table for the meter section Click here
Blind spot monitor sensor RH Click here
Outer rear view mirror indicator LH does not flash Proceed to "Turn indicator light malfunction" in Problem Symptoms Table for the meter section Click here
Blind spot monitor sensor LH Click here
Outer rear view mirror indicator RH continues to flash Blind spot monitor sensor RH Click here
Outer rear view mirror indicator LH continues to flash Blind spot monitor sensor LH Click here

RCTA Function
Symptom Suspected Area Link
Function does not operate at all
(Blind spot monitor function operates normally)
Data List / Active Test (Reverse) Click here
Automatic transaxle system (U760E) Click here
Blind spot monitor sensor RH Click here