Use the same procedure for the RH side and LH side.
The following procedure is for the LH side.
1.REMOVE REAR BUMPER ASSEMBLY
64711
2.REMOVE LUGGAGE COMPARTMENT FLOOR MAT
58387
3.REMOVE REAR FLOOR FINISH PLATE
64725D
4.REMOVE NO. 1 LUGGAGE COMPARTMENT TRIM HOOK
64722
5.REMOVE LUGGAGE COMPARTMENT INNER TRIM COVER
6.REMOVE REAR COMBINATION LIGHT ASSEMBLY
Disconnect the 2 connectors.
Disengage the clamp.
Remove the 3 nuts.
Disengage the guide and remove the rear combination light assembly as shown in the illustration.