Home › Vehicle Interior › METER / GAUGE / DISPLAY › COMBINATION METER › from 2015.04
RM19V0EQ _58 Vehicle Interior _014608 METER / GAUGE / DISPLAY _0074145 COMBINATION METER A

METER / GAUGE / DISPLAY  COMBINATION METER  INSTALLATION  


PROCEDURE

Hide 83100 1.INSTALL COMBINATION METER ASSEMBLY

a.

Connect the 2 connectors.


b.

Engage the wire harness clamp.


c.

Install the combination meter assembly with the 4 screws.


Hide 55410C 2.INSTALL INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY

Hide 55650 3.INSTALL NO. 1 INSTRUMENT PANEL REGISTER ASSEMBLY

Hide 55474C 4.INSTALL NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH (for LHD)

Hide 55431B 5.INSTALL UPPER INSTRUMENT PANEL FINISH PANEL (for RHD)

Hide 62312B 7.INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP

Hide 8.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION