Home › Suspension › TIRE PRESSURE MONITORING › TIRE PRESSURE WARNING RECEIVER › from 2016.05
RM19V0EQ _53 Suspension _052591 TIRE PRESSURE MONITORING _0254470 TIRE PRESSURE WARNING RECEIVER A

TIRE PRESSURE MONITORING  TIRE PRESSURE WARNING RECEIVER  INSTALLATION  


PROCEDURE

Hide 89760C 1.INSTALL TIRE PRESSURE WARNING ECU AND RECEIVER

NOTICE:
·

Do not drop, strike or otherwise subject the tire pressure warning ECU and receiver to impact.

·

If the tire pressure warning ECU and receiver is subjected to an impact, replace it with a new one.



a.
C236171

Connect the connector.


b.
C277193

Engage the 2 guides and install the tire pressure warning ECU and receiver with the bolt.

Torque:
8.5 N*m (87 kgf*cm, 75 in.*lbf)


Hide 62472A 2.INSTALL ROOF SIDE INNER GARNISH LH

Hide 3.INSTALL REAR SEATBACK ASSEMBLY (for Fixed Seat Type)

Hide 72693 4.INSTALL REAR SEAT CUSHION LOCK HOOK (for Fixed Seat Type)

Hide 5.INSTALL REAR SEAT CUSHION ASSEMBLY (for Fixed Seat Type)

Hide 6.INSTALL REAR SIDE SEATBACK ASSEMBLY LH (for Fold Down Seat Type)

Hide 72693 7.INSTALL REAR SEAT CUSHION LOCK HOOK (for Fold Down Seat Type)

Hide 8.INSTALL REAR SEAT CUSHION ASSEMBLY (for Fold Down Seat Type)

Hide 62332A 9.INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH