REAR SEAT SIDE AIRBAG ASSEMBLY > REMOVAL |
| 1. PRECAUTION |
| 2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 3. REMOVE REAR SEAT HEADREST ASSEMBLY |
| 4. REMOVE REAR SEAT CUSHION ASSEMBLY |
![]() |
Disengage the hook of the seat cushion from the vehicle body as shown in the illustration.
| a | 100 mm (3.94 in.) or less |
Choose a hook to detach first. Place your hands near the hook as shown in the illustration. Then lift the seat cushion to detach the hook.
Repeat the step above for the other hook.
w/ Seat Heater System:
Disconnect the 2 seat heater connectors.
Remove the rear seat cushion assembly.
| 5. REMOVE REAR SEAT CUSHION LOCK HOOK |
![]() |
Disengage the claw and remove the rear seat cushion lock hook.
| 6. REMOVE REAR SEATBACK COVER |
![]() |
Disengage the 4 claws and remove the 2 rear seatback covers.
| 7. REMOVE REAR SEATBACK ASSEMBLY |
w/ Rear Seat Side Airbag:
Disconnect each connector and clamp from the child restraint seat anchor bracket sub-assembly LH.
Disengage the 2 rear seat belts from the 2 rear seat shoulder belt guides.
![]() |
Disengage the 2 hooks and disconnect the cover.
Remove the 2 nuts, 2 bolts and rear seatback assembly LH.
| 8. REMOVE REAR SEAT CENTER SHOULDER BELT GUIDE (for LH Side) |
![]() |
Remove the 2 screws.
Disengage the guide and remove the rear seat center shoulder belt guide.
| 9. REMOVE REAR SEAT SHOULDER BELT GUIDE |
![]() |
Remove the 2 screws.
Disengage the guide and remove the rear seat shoulder belt guide LH.
| 10. REMOVE SEPARATE TYPE REAR SEATBACK COVER WITH PAD |
![]() |
Disengage each hooks.
Remove the 12 hog rings.
w/ Rear Seat Side Airbag:
![]() |
Remove the nut and separate the airbag bracket.
![]() |
Disengage the 4 claws and remove the 2 rear seat headrest supports.
w/ Seat Heater System:
Disengage the clamp to disconnect the seat heater wire harness from the rear seatback frame sub-assembly LH.
Remove the separate type rear seatback cover with pad from the rear seatback frame sub-assembly LH.
| 11. REMOVE REAR SEAT AIRBAG ASSEMBLY |
![]() |
Disengage the 2 clamps.
Remove the 2 nuts and rear seat airbag assembly.