Home › Vehicle Interior › SUPPLEMENTAL RESTRAINT SYSTEMS › OCCUPANT CLASSIFICATION ECU

OCCUPANT CLASSIFICATION ECU > REMOVAL

for Preparation Click here



1. PRECAUTION

CAUTION:
Be sure to read Precaution thoroughly before servicing.
for Separate Type Yaw Rate Sensor: (Click here)
for Built-in Type Yaw Rate Sensor: (Click here)



2. REMOVE FRONT SEAT ASSEMBLY RH

HINT:
Use the same procedure for the RH side and LH side.
  1. for TMMK Made Manual Seat: (Click here)
  2. for SIA Made Manual Seat: (Click here)
  3. for TMMK Made Power Seat: (Click here)
  4. for SIA Made Power Seat: (Click here)



3. REMOVE OCCUPANT DETECTION ECU


    B278816E01
  1. Disconnect the 2 connectors.

  1. Using a screwdriver with the tip wrapped with protective tape, disengage the claw and remove the occupant detection ECU.
    Text in Illustration 
    *1
    Protective Tape