Home › Power Source / Network ยท NETWORKING › CAN COMMUNICATION SYSTEM

CAN COMMUNICATION SYSTEM > DIAGNOSTIC TROUBLE CODE CHART

for Preparation Click here


The network gateway ECU (sub bus monitor ECU) stores DTCs when it detects a communication stop or network communication error for ECUs connected to sub bus 2.

Network Gateway ECU Output DTCs (Techstream Display/Gateway) 
DTC Code
Detection Item
See page
U0232
Lost Communication with Blind Spot Monitor Slave Module
Click here
U0233
Lost Communication with Blind Spot Monitor Master Module
Click here
U1002
Lost Communication with Gateway Module
Click here