LUMBAR SWITCH > INSTALLATION |
| 1. INSTALL FRONT LUMBAR POWER SEAT SWITCH (for TMMK Made) |
Connect the connector to install the front lumbar power seat switch.
| 2. INSTALL FRONT POWER SEAT SWITCH (for TMMK Made) |
| 3. INSTALL FRONT LUMBAR POWER SEAT SWITCH (for SIA Made) |
Engage the 4 claws to install the front lumbar power seat switch to the front seat cushion shield.
| 4. INSTALL FRONT SEAT CUSHION SHIELD (for SIA Made) |
Connect the front lumbar power seat switch connector.
Connect the front power seat switch connector.
Engage the 2 wire harness clamps.
Install the wire harness to the wire harness cover.
Engage the 2 claws to close the wire harness cover.
Engage the 4 claws, 7 guides and clip to install the front seat cushion shield.
| 5. INSTALL NO. 1 FRONT SEAT INNER CUSHION SHIELD (for SIA Made) |
![]() |
Engage the 3 claws and 3 guides to install the front No. 1 seat inner cushion shield as shown in the illustration.
![]() |
Engage the 2 claws to install the clip to the front No. 1 seat inner cushion shield as shown in the illustration.
Install the screw.
| 6. CONNECT SEPARATE TYPE FRONT SEATBACK COVER (for SIA Made) |
Connect the rubber band of the separate type front seatback cover.
| 7. INSTALL FRONT SEAT ASSEMBLY (for SIA Made) |