Home › Engine / Hybrid System › 2GR-FE INTAKE / EXHAUST › INTAKE AIR CONTROL VALVE(for Intake Air Control System)
RM2030EQ _51 Engine / Hybrid System _014638 2GR-FE INTAKE / EXHAUST _0074435 INTAKE AIR CONTROL VALVE(for Intake Air Control System) G

2GR-FE INTAKE / EXHAUST  INTAKE AIR CONTROL VALVE(for Intake Air Control System)  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 1.INSPECT INTAKE AIR CONTROL VALVE (for Intake Air Control System)

a.

Remove the inlet No. 2 air cleaner.

Click hereEngine / Hybrid System>2GR-FE ENGINE MECHANICAL>ENGINE ASSEMBLY>REMOVAL


b.
A255345

Using a vacuum pump, apply 27 kPa (200 mmHg, 7.88 in.Hg) or higher of vacuum to the diaphragm chamber and check that the valve moves.


c.

Wait 1 minute and check that the needle of the vacuum pump does not lower.

If the operation is not as specified, replace the air cleaner case sub-assembly.


d.