Home › Engine / Hybrid System › 2GR-FE COOLING › THERMOSTAT
RM2030EQ _51 Engine / Hybrid System _014639 2GR-FE COOLING _0074444 THERMOSTAT A

2GR-FE COOLING  THERMOSTAT  INSTALLATION  


PROCEDURE

Hide 16331A 1.INSTALL THERMOSTAT

a.

Install a new gasket to the thermostat.


b.
A132392
1.667,0.75 0.802,0.75 false 1.156,0.125 1.385,0.323 0.229,0.198 10 *a 2.083,0.125 2.302,0.313 0.219,0.188 10 *a 0.625,0.667 0.844,0.833 0.219,0.167 10 *1
*1 Jiggle Valve
*a 10°


Install the thermostat with the jiggle valve facing up.

HINT:

The jiggle valve may be set within 10° on either side of the prescribed position.



Hide 16321 2.INSTALL WATER INLET

a.

Install the water inlet with the 2 nuts .

Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)


Hide 16572D 3.CONNECT NO. 2 RADIATOR HOSE

Hide 16604 4.INSTALL NO. 2 IDLER PULLEY SUB-ASSEMBLY