Home › Engine / Hybrid System › 2GR-FE COOLING › RADIATOR
RM2030EQ _51 Engine / Hybrid System _014639 2GR-FE COOLING _0074447 RADIATOR A

2GR-FE COOLING  RADIATOR  INSTALLATION  


PROCEDURE

Hide 16400 1.INSTALL RADIATOR ASSEMBLY

a.
A255515C01
1.651,1.991 1.827,2.14 0.176,0.149 10 *1 2.259,1.837 1.847,2.041 false 1.175,1.834 1.61,2.036 false
*1 Guide


Install the fan assembly to the radiator with the 2 guides at the bottom and 3 claws on the top.


b.

Install the 2 lower radiator supports to the radiator assembly.


c.
A260178

Install the radiator with fan assembly.

NOTICE:

Do not apply any excessive force to the cooler condenser assembly or pipe when installing the radiator assembly.



d.

Install the condenser assembly with the 4 bolts.

Torque:
6.0 N*m (61 kgf*cm, 53 in.*lbf)


e.

Connect the 3 clamps and connector.


Hide 53216A 2.INSTALL UPPER RADIATOR SUPPORT

a.

Install the 2 radiator support cushions to the radiator assembly.


b.

Install the upper radiator support with the 5 bolts and connect the hood lock control cable clamp to the upper radiator support.

Torque:
12 N*m (122 kgf*cm, 9 ft.*lbf)


c.

Connect the 2 connectors.


Hide 53510 3.INSTALL HOOD LOCK ASSEMBLY (for LHD)

Hide 53510 4.INSTALL HOOD LOCK ASSEMBLY (for RHD)

Hide 32942 5.CONNECT OUTLET NO. 1 OIL COOLER HOSE

a.

Connect the outlet No. 1 oil cooler hose.


Hide 32941 6.CONNECT INLET NO. 1 OIL COOLER HOSE

a.

Connect the inlet No. 1 oil cooler hose.


Hide 16572D 7.CONNECT NO. 2 RADIATOR HOSE

a.

Connect the outlet radiator hose and clamp.


Hide 16571C 8.CONNECT NO. 1 RADIATOR HOSE

a.

Connect the inlet radiator hose.


Hide 16470 9.INSTALL RADIATOR RESERVE TANK ASSEMBLY

a.

Install the radiator reserve tank with the 2 bolts.

Torque:
7.0 N*m (71 kgf*cm, 62 in.*lbf)


b.

Connect the radiator reserve tank hose.


Hide 17751 10.INSTALL INLET NO. 1 AIR CLEANER

Hide 17752 11.INSTALL INLET NO. 2 AIR CLEANER

Hide 13.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION


Hide 16.INSTALL FRONT BUMPER ASSEMBLY

Hide 51442C 17.INSTALL ENGINE UNDER COVER LH

Hide 51441C 18.INSTALL ENGINE UNDER COVER RH

Hide 53852K 19.INSTALL FRONT WHEEL OPENING EXTENSION PAD LH

Hide 53851Z 20.INSTALL FRONT WHEEL OPENING EXTENSION PAD RH