1. PRECAUTION
After turning the engine switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notices before proceeding with work.
Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION
2.DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
When disconnecting the cable from the negative (-) battery terminal, some systems need to be initialized after the cable is reconnected.
Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION
3.REMOVE RADIO RECEIVER ASSEMBLY WITH AIR CONDITIONING CONTROL ASSEMBLY (for LHD)
4.REMOVE NAVIGATION RECEIVER ASSEMBLY WITH AIR CONDITIONING CONTROL ASSEMBLY (for LHD)
67914
5.REMOVE FRONT DOOR SCUFF PLATE LH (for LHD)
62112A
6.REMOVE COWL SIDE TRIM SUB-ASSEMBLY LH (for LHD)
62312B
7.DISCONNECT FRONT DOOR OPENING TRIM WEATHERSTRIP LH (for LHD)
55318C
8.REMOVE INSTRUMENT SIDE PANEL LH (for LHD)
55650
9.REMOVE NO. 1 INSTRUMENT PANEL REGISTER ASSEMBLY (for LHD)
55410C
10.REMOVE INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (for LHD)
53601
11.DISCONNECT HOOD LOCK CONTROL LEVER SUB-ASSEMBLY (for LHD)
55432D
12.REMOVE LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL (for LHD)
74110E
13.REMOVE FRONT ASH RECEPTACLE ASSEMBLY (for LHD)
14.REMOVE CONSOLE BOX ASSEMBLY (for LHD)
58817A
15.REMOVE FRONT NO. 2 CONSOLE BOX INSERT (for LHD)
55480D
16.REMOVE LOWER INSTRUMENT PANEL FINISH PANEL ASSEMBLY (for LHD)
89611
17.REMOVE ENGINE SWITCH (for LHD)
Disengage the 2 claws and remove the engine switch.
67913
18.REMOVE FRONT DOOR SCUFF PLATE RH (for RHD)
62111A
19.REMOVE COWL SIDE TRIM SUB-ASSEMBLY RH (for RHD)
62311B
20.DISCONNECT FRONT DOOR OPENING TRIM WEATHERSTRIP RH (for RHD)
55317A
21.REMOVE INSTRUMENT SIDE PANEL RH (for RHD)
55431B
22.REMOVE UPPER INSTRUMENT PANEL FINISH PANEL (for RHD)
89611
23.REMOVE ENGINE SWITCH (for RHD)
Disengage the 2 claws and remove the engine switch.