Home › Audio / Visual / Telematics › NAVIGATION / MULTI INFO DISPLAY › HARD DISK DRIVE › 2012.02–2015.04
RM2030EQ _56 Audio / Visual / Telematics _014659 NAVIGATION / MULTI INFO DISPLAY _0074555 HARD DISK DRIVE A

NAVIGATION / MULTI INFO DISPLAY  HARD DISK DRIVE  INSTALLATION  


PROCEDURE

Hide 1. PRECAUTION

NOTICE:

When installing the hard disk drive, eliminate static electricity by touching the vehicle body to prevent components from being damaged.


Hide 2.INSTALL HARD DISK DRIVE

a.
E223755

Insert the hard disk drive as shown in the illustration.


b.

Engage the 2 guides to temporarily install the cover.


c.

Install the cover with the 2 screws.


Hide 4.INSTALL NAVIGATION RECEIVER ASSEMBLY WITH AIR CONDITIONING CONTROL ASSEMBLY

Hide 58831A 5.INSTALL FRONT CONSOLE UPPER PANEL GARNISH

Hide 55660 6.INSTALL NO. 2 INSTRUMENT PANEL REGISTER ASSEMBLY

Hide 55405B 7.INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY

Hide 10.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION