Home › Vehicle Interior › SEAT BELT › REAR SEAT OUTER BELT ASSEMBLY › 2012.02–2016.05
RM2030EQ _58 Vehicle Interior _014671 SEAT BELT _0074648 REAR SEAT OUTER BELT ASSEMBLY A

SEAT BELT  REAR SEAT OUTER BELT ASSEMBLY  REMOVAL  


PROCEDURE

Hide 1.REMOVE REAR SEAT CUSHION ASSEMBLY

Hide 72693 2.REMOVE REAR SEAT CUSHION LOCK HOOK

Hide 73480 3.DISCONNECT REAR SEAT INNER WITH CENTER BELT ASSEMBLY LH (for LHD)

Hide 73480 4.DISCONNECT REAR SEAT INNER WITH CENTER BELT ASSEMBLY LH (for RHD)

Hide 5.REMOVE REAR SIDE SEATBACK ASSEMBLY LH

Hide 6.REMOVE REAR SIDE SEATBACK ASSEMBLY RH

Hide 73370C 7.DISCONNECT REAR NO. 1 SEAT OUTER BELT ASSEMBLY LH

a.
B279440

Remove the bolt and disconnect the floor anchor of the rear No. 1 seat outer belt assembly LH.


Hide 73360C 8.DISCONNECT REAR NO. 1 SEAT OUTER BELT ASSEMBLY RH

a.
B293616

Remove the bolt and disconnect the floor anchor of the rear No. 1 seat outer belt assembly RH.


Hide 62332A 9.DISCONNECT REAR DOOR OPENING TRIM WEATHERSTRIP LH

a.

Disconnect the rear door opening trim weatherstrip LH.


Hide 62331A 10.DISCONNECT REAR DOOR OPENING TRIM WEATHERSTRIP RH

a.

Disconnect the rear door opening trim weatherstrip RH.


Hide 62472A 11.REMOVE ROOF SIDE INNER GARNISH LH

Hide 62471A 12.REMOVE ROOF SIDE INNER GARNISH RH

HINT:

Use the same procedure as for the LH side.


Hide 73373 13.REMOVE REAR SEAT SHOULDER BELT COVER

a.
B271099

Using a moulding remover, disengage the 2 claws and 4 guides and remove the rear seat shoulder belt cover.

HINT:

Use the same procedure for the other 2 rear seat shoulder belt covers.



Hide 64330 14.REMOVE PACKAGE TRAY TRIM PANEL ASSEMBLY (w/o Rear Sunshade)

a.
B279543

Disconnect the connector.


b.
B279544C01
2.521,3.76 1.74,3.948 true 1.531,3.885 1.74,4.083 0.208,0.198 10 false *1
*1 Protective Tape


Using pliers, disengage the 3 clips from inside the luggage compartment as shown in the illustration.

HINT:

Tape the tips of pliers before use.



c.

Disengage the 5 guides.


d.

Pass the 3 rear seat belt floor anchors through the package tray trim panel assembly then remove the package tray trim panel assembly.


Hide 64330 15.REMOVE PACKAGE TRAY TRIM PANEL ASSEMBLY (w/ Rear Sunshade)

a.
B279545C01
2.521,3.5 1.677,3.771 true 1.5,3.677 1.771,3.927 0.271,0.25 10 false *1
*1 Protective Tape


Using pliers, disengage the 3 clips from inside the luggage compartment as shown in the illustration.

HINT:

Tape the tips of pliers before use.



b.

Disengage the guide.


c.

Pass the 3 rear seat belt floor anchors through the package tray trim panel assembly then remove the package tray trim panel assembly.


Hide 73370C 16.REMOVE REAR NO. 1 SEAT OUTER BELT ASSEMBLY LH

a.
B293399

Remove the bolt.


b.

Disengage the guide to remove the rear No. 1 seat outer belt assembly LH.


Hide 73360C 17.REMOVE REAR NO. 1 SEAT OUTER BELT ASSEMBLY RH

HINT:

Use the same procedure as for the LH side.