Home › Vehicle Interior › HEATING / AIR CONDITIONING › BLOWER UNIT
RM2030EQ _58 Vehicle Interior _014672 HEATING / AIR CONDITIONING _0074655 BLOWER UNIT A

HEATING / AIR CONDITIONING  BLOWER UNIT  REASSEMBLY  


PROCEDURE

Hide 87103B 1.INSTALL BLOWER MOTOR WITH FAN SUB-ASSEMBLY

a.
E226848

Install the blower motor with fan sub-assembly with the 3 screws.


Hide 87130K 2.INSTALL NO. 1 BLOWER DAMPER SERVO SUB-ASSEMBLY

a.
E226842

Install the No. 1 blower damper servo sub-assembly with the 3 screws.


Hide 87139C 3.INSTALL CLEAN AIR FILTER

a.
E248528

Install the clean air filter as shown in the illustration.


Hide 88899M 4.INSTALL AIR FILTER COVER PLATE

a.
E226843

Engage the 2 claws to install the air filter cover plate.


Hide 87201A 5.INSTALL AIR DUCT SUB-ASSEMBLY

a.
E226840

Engage the 4 claws to install the air duct sub-assembly.


Hide 88539J 6.INSTALL DRAIN COOLER HOSE

a.
E234897
1.208,1.792 2.156,1.708 false 2.938,1.229 2.24,1.667 false 1.042,1.698 1.333,1.927 0.292,0.229 10 false *1 2.948,1.115 3.26,1.365 0.313,0.25 10 false *2
*1 Hose Notch
*2 Blower Case Assembly Rib


Align the hose notch and blower case assembly rib as shown in the illustration and install the drain cooler hose.


Hide 88501 7.INSTALL NO. 1 COOLER EVAPORATOR SUB-ASSEMBLY

Hide 88515 9.INSTALL COOLER EXPANSION VALVE