The skid control ECU stores this DTC if malfunctions are found in the circuit inside the ECU by self diagnosis.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area |
|---|---|---|---|
| C1300 | Skid Control ECU Malfunction | Internal failure of the skid control ECU control unit. | Skid control ECU (Brake actuator assembly) |
Replace the skid control ECU (brake actuator assembly).
Click hereBrake>BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS>BRAKE ACTUATOR>REMOVAL
This DTC is output when the skid control ECU detects a malfunction in the internal circuit.
Perform system variant learning.
Click hereBrake>BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS>VEHICLE STABILITY CONTROL SYSTEM>CALIBRATION
Perform the sensor check using the Test Mode procedure.
Click hereBrake>BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS>VEHICLE STABILITY CONTROL SYSTEM>TEST MODE PROCEDURE
| Tester Display |
|---|
| Test Mode |
| Proceed to |
|---|
| NEXT |
NEXT