Home › Vehicle Interior › HEATING / AIR CONDITIONING › AIR CONDITIONING SYSTEM
RM2030EQ _58 Vehicle Interior _014672 HEATING / AIR CONDITIONING _0074651 AIR CONDITIONING SYSTEM C

HEATING / AIR CONDITIONING  AIR CONDITIONING SYSTEM  B1497/97  BUS IC Communication Malfunction  


DESCRIPTION

The air conditioning harness assembly connects the air conditioning amplifier assembly and the servo motors. The air conditioning amplifier assembly supplies power and sends operation instructions to each servo motor through the air conditioning harness assembly. Each servo motor sends damper position information to the air conditioning amplifier assembly.

DTC No. Detection Item DTC Detection Condition Trouble Area Memory
B1497/97 BUS IC Communication Malfunction Error or open in communication line
·

Air conditioning harness assembly

·

No. 1 air conditioning radiator damper servo sub-assembly

·

No. 2 air conditioning radiator damper servo sub-assembly

·

No. 1 blower damper servo sub-assembly

·

Air conditioning amplifier assembly


Memorized
(10 sec. or more)*1

*1: The air conditioning amplifier assembly stores the DTC of the respective malfunction if it has occurred for the period of time indicated in the brackets.


WIRING DIAGRAM

E235674
5.042,0.979 7.042,1.479 2,0.5 10 false No. 1 Air Conditioning Radiator Damper Servo Sub-assembly (Air Mix*2) 5.042,3.01 7.042,3.51 2,0.5 10 false No. 2 Air Conditioning Radiator Damper Servo Sub-assembly (Air Mix*1) 5.042,4.969 7.042,5.469 2,0.5 10 false No. 1 Air Conditioning Radiator Damper Servo Sub-assembly (Air outlet) 5.042,7.26 6.781,7.667 1.74,0.406 10 false No. 1 Blower Damper Servo Sub-assembly (Air inlet) 0.458,6.177 1.25,6.344 0.792,0.167 10 false from Battery 0.479,7.031 2.458,7.188 1.979,0.156 10 false *1: for Driver Side 0.479,7.458 2.458,7.615 1.979,0.156 10 false *2: for Front Passenger Side 1.792,6.323 2.198,6.51 0.406,0.188 10 false A/C-B 2.792,0.75 3.271,0.906 0.479,0.156 10 false B BUS 2.792,1.125 3.104,1.281 0.313,0.156 10 false BUS 2.792,1.51 3.25,1.667 0.458,0.156 10 false BUS G 0.708,0.813 1.156,0.969 0.448,0.156 10 false B BUS 0.365,0.177 1.125,0.354 0.76,0.177 12 false for LHD: 0.188,5.135 1.771,5.469 1.583,0.333 10 false Air Conditioning Amplifier Assembly 1.031,4.24 1.167,4.396 0.135,0.156 10 false B 1.333,4.052 1.51,4.208 0.177,0.156 10 false 21 1.333,4.229 1.542,4.385 0.208,0.156 10 false I77 1.354,0.823 1.521,0.979 0.167,0.156 10 false z1 1.365,1.208 1.823,1.854 0.458,0.646 10 false z1 1.354,1.604 1.521,1.76 0.167,0.156 10 false z1 1.385,0.646 1.49,0.802 0.104,0.156 10 false 4 1.385,1.031 1.49,1.188 0.104,0.156 10 false 3 1.385,1.438 1.49,1.594 0.104,0.156 10 false 2 0.854,1.208 1.167,1.365 0.313,0.156 10 false BUS 0.708,1.573 1.167,1.729 0.458,0.156 10 false BUS G 2.313,8.042 3.885,8.365 1.573,0.323 10 false Air Conditioning Harness Assembly

E235674
5.042,0.979 7.042,1.479 2,0.5 10 false No. 1 Air Conditioning Radiator Damper Servo Sub-assembly (Air Mix*1) 5.042,3.01 7.042,3.51 2,0.5 10 false No. 2 Air Conditioning Radiator Damper Servo Sub-assembly (Air Mix*2) 5.042,4.969 7.042,5.469 2,0.5 10 false No. 1 Air Conditioning Radiator Damper Servo Sub-assembly (Air outlet) 5.042,7.26 6.792,7.615 1.75,0.354 10 false No. 1 Blower Damper Servo Sub-assembly (Air inlet) 0.469,6.177 1.25,6.615 0.781,0.438 10 false from Battery 0.479,7.031 2.458,7.188 1.979,0.156 10 false *1: for Driver Side 0.479,7.458 2.458,7.615 1.979,0.156 10 false *2: for Front Passenger Side 1.792,6.323 2.198,6.51 0.406,0.188 10 false A/C-B 2.792,0.75 3.271,0.906 0.479,0.156 10 false B BUS 2.792,1.125 3.104,1.281 0.313,0.156 10 false BUS 2.792,1.51 3.25,1.667 0.458,0.156 10 false BUS G 0.708,0.813 1.156,0.969 0.448,0.156 10 false B BUS 0.365,0.177 1.125,0.354 0.76,0.177 12 false for RHD: 0.188,5.135 1.771,5.469 1.583,0.333 10 false Air Conditioning Amplifier Assembly 1.031,4.24 1.167,4.396 0.135,0.156 10 false B 1.333,4.052 1.51,4.208 0.177,0.156 10 false 21 1.333,4.229 1.552,4.385 0.219,0.156 10 false I77 1.354,0.823 1.521,0.979 0.167,0.156 10 false z1 1.354,1.208 1.521,1.365 0.167,0.156 10 false z1 1.354,1.604 1.521,1.76 0.167,0.156 10 false z1 1.385,0.646 1.49,0.802 0.104,0.156 10 false 4 1.385,1.031 1.49,1.188 0.104,0.156 10 false 3 1.385,1.438 1.49,1.594 0.104,0.156 10 false 2 0.854,1.208 1.167,1.365 0.313,0.156 10 false BUS 0.708,1.573 1.167,1.729 0.458,0.156 10 false BUS G 2.313,8.042 3.885,8.365 1.573,0.323 10 false Air Conditioning Harness Assembly

CAUTION / NOTICE / HINT

NOTICE:

Inspect the fuses for circuits related to this system before performing the following inspection procedure.


PROCEDURE

1.CONFIRM MODEL
Result:
Result Proceed to
for LHD A
for RHD B



A

2.PERFORM ACTIVE TEST USING INTELLIGENT TESTER

B

8.PERFORM ACTIVE TEST USING INTELLIGENT TESTER
2.PERFORM ACTIVE TEST USING INTELLIGENT TESTER
a.

Connect the intelligent tester to the DLC3.


b.

Turn the ignition switch to ON.


c.

Turn the intelligent tester on.


d.

Enter the following menus: Body / Air Conditioner / Active test.


e.

Check the operation by referring to the table below.

Body Electrical > Air Conditioner > Active Test
Tester Display Measurement Item Control Range Diagnostic Note
Air Mix Servo Targ Pulse(D) No. 2 air conditioning radiator damper servo sub-assembly (air mix for driver side) pulse Min.: 0, Max.: 255 Operates between 5 and 103 pulses
Air Mix Servo Targ Pulse(P) No. 1 air conditioning radiator damper servo sub-assembly (air mix for front passenger side) pulse Min.: 0, Max.: 255 Operates between 7 and 105 pulses
Air Outlet Servo Pulse (D) No. 1 air conditioning radiator damper servo sub-assembly (air outlet) pulse Min.: 0, Max.: 255 Operates between 8 and 97 pulses
Air Inlet Damper Targ Pulse No. 1 blower damper servo sub-assembly (air inlet) pulse Min.: 0, Max.: 255 Operates between 7 and 28 pulses
Body Electrical > Air Conditioner > Active Test
Tester Display
Air Mix Servo Targ Pulse(D)
50004 121 24
Body Electrical > Air Conditioner > Active Test
Tester Display
Air Mix Servo Targ Pulse(P)
50004 121 25
Body Electrical > Air Conditioner > Active Test
Tester Display
Air Outlet Servo Pulse (D)
50004 121 26
Body Electrical > Air Conditioner > Active Test
Tester Display
Air Inlet Damper Targ Pulse
50004 121 27
OK:

Arm of the damper servo motor selected in the Active Test moves smoothly.



f.

According to the test result, proceed to the next step.

Result:
Result Proceed to
One of the damper servo motors is malfunctioning A
All of the damper servo motors are malfunctioning B




A

3.SYSTEM CHECK

B

14.REPLACE AIR CONDITIONING HARNESS ASSEMBLY
3.SYSTEM CHECK
a.

According to the test result, proceed to the next step.

Result:
Result Proceed to
Only the No. 2 air conditioning radiator damper servo sub-assembly (air mix for driver side) is malfunctioning A
Only the No. 1 air conditioning radiator damper servo sub-assembly (air mix for front passenger side) is malfunctioning B
Only the No. 1 blower damper servo sub-assembly (air inlet) is malfunctioning C
Only the No. 1 air conditioning radiator damper servo sub-assembly (air outlet) is malfunctioning D




A

4.REPLACE NO. 2 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY (AIR MIX FOR DRIVER SIDE)

B

5.REPLACE NO. 1 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY (AIR MIX FOR FRONT PASSENGER SIDE)

C

6.REPLACE NO. 1 BLOWER DAMPER SERVO SUB-ASSEMBLY (AIR INLET)

D

7.REPLACE NO. 1 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY (AIR OUTLET)
4.REPLACE NO. 2 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY (AIR MIX FOR DRIVER SIDE)
a.

Replace the No. 2 air conditioning radiator damper servo sub-assembly (air mix for driver side).

Click hereVehicle Interior>HEATING / AIR CONDITIONING>AIR CONDITIONING UNIT>DISASSEMBLY

HINT:

Since the servo motor cannot be inspected while it is removed from the vehicle, replace the servo motor with a new or a known good one and check that the condition returns to normal.



b.

Check for the DTC.

Body Electrical > Air Conditioner > Trouble Codes
50001 121
Result:
Result Proceed to
DTC B1497/97 is not output A
DTC B1497/97 is output B




A

END

B

14.REPLACE AIR CONDITIONING HARNESS ASSEMBLY
5.REPLACE NO. 1 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY (AIR MIX FOR FRONT PASSENGER SIDE)
a.

Replace the No. 1 air conditioning radiator damper servo sub-assembly (air mix for front passenger side).

Click hereVehicle Interior>HEATING / AIR CONDITIONING>AIR CONDITIONING UNIT>DISASSEMBLY

HINT:

Since the servo motor cannot be inspected while it is removed from the vehicle, replace the servo motor with a new or a known good one and check that the condition returns to normal.



b.

Check for the DTC.

Body Electrical > Air Conditioner > Trouble Codes
50001 121
Result:
Result Proceed to
DTC B1497/97 is not output A
DTC B1497/97 is output B




A

END

B

14.REPLACE AIR CONDITIONING HARNESS ASSEMBLY
6.REPLACE NO. 1 BLOWER DAMPER SERVO SUB-ASSEMBLY (AIR INLET)
a.

Replace the No. 1 blower damper servo sub-assembly (air inlet).

Click hereVehicle Interior>HEATING / AIR CONDITIONING>BLOWER UNIT>DISASSEMBLY

HINT:

Since the servo motor cannot be inspected while it is removed from the vehicle, replace the servo motor with a new or a known good one and check that the condition returns to normal.



b.

Check for the DTC.

Body Electrical > Air Conditioner > Trouble Codes
50001 121
Result:
Result Proceed to
DTC B1497/97 is not output A
DTC B1497/97 is output B




A

END

B

14.REPLACE AIR CONDITIONING HARNESS ASSEMBLY
7.REPLACE NO. 1 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY (AIR OUTLET)
a.

Replace the No. 1 air conditioning radiator damper servo sub-assembly (air outlet).

Click hereVehicle Interior>HEATING / AIR CONDITIONING>AIR CONDITIONING UNIT>DISASSEMBLY

HINT:

Since the servo motor cannot be inspected while it is removed from the vehicle, replace the servo motor with a new or a known good one and check that the condition returns to normal.



b.

Check for the DTC.

Body Electrical > Air Conditioner > Trouble Codes
50001 121
Result:
Result Proceed to
DTC B1497/97 is not output A
DTC B1497/97 is not output B




A

END

B

14.REPLACE AIR CONDITIONING HARNESS ASSEMBLY
8.PERFORM ACTIVE TEST USING INTELLIGENT TESTER
a.

Connect the intelligent tester to the DLC3.


b.

Turn the ignition switch to ON.


c.

Turn the intelligent tester on.


d.

Enter the following menus: Body / Air Conditioner / Active test.


e.

Check the operation by referring to the table below.

Body Electrical > Air Conditioner > Active Test
Tester Display Measurement Item Control Range Diagnostic Note
Air Mix Servo Targ Pulse(D) No. 1 air conditioning radiator damper servo sub-assembly (air mix for driver side) pulse Min.: 0, Max.: 255 Operates between 7 and 105 pulses
Air Mix Servo Targ Pulse(P) No. 2 air conditioning radiator damper servo sub-assembly (air mix for front passenger side) pulse Min.: 0, Max.: 255 Operates between 5 and 103 pulses
Air Outlet Servo Pulse (D) No. 1 air conditioning radiator damper servo sub-assembly (air outlet) pulse Min.: 0, Max.: 255 Operates between 8 and 97 pulses
Air Inlet Damper Targ Pulse No. 1 blower damper servo sub-assembly (air inlet) pulse Min.: 0, Max.: 255 Operates between 7 and 28 pulses
Body Electrical > Air Conditioner > Active Test
Tester Display
Air Mix Servo Targ Pulse(D)
50004 121 24
Body Electrical > Air Conditioner > Active Test
Tester Display
Air Mix Servo Targ Pulse(P)
50004 121 25
Body Electrical > Air Conditioner > Active Test
Tester Display
Air Outlet Servo Pulse (D)
50004 121 26
Body Electrical > Air Conditioner > Active Test
Tester Display
Air Inlet Damper Targ Pulse
50004 121 27
OK:

Arm of the damper servo motor selected in the Active Test moves smoothly.



f.

According to the test result, proceed to the next step.

Result:
Result Proceed to
One of the damper servo motors is malfunctioning A
All of the damper servo motors are malfunctioning B




A

9.SYSTEM CHECK

B

14.REPLACE AIR CONDITIONING HARNESS ASSEMBLY
9.SYSTEM CHECK
a.

According to the test result, proceed to the next step.

Result:
Result Proceed to
Only the No. 1 air conditioning radiator damper servo sub-assembly (air mix for driver side) is malfunctioning A
Only the No. 2 air conditioning radiator damper servo sub-assembly (air mix for front passenger side) is malfunctioning B
Only the No. 1 blower damper servo sub-assembly (air inlet) is malfunctioning C
Only the No. 1 air conditioning radiator damper servo sub-assembly (air outlet) is malfunctioning D




A

10.REPLACE NO. 1 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY (AIR MIX FOR DRIVER SIDE)

B

11.REPLACE NO. 2 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY (AIR MIX FOR FRONT PASSENGER SIDE)

C

12.REPLACE NO. 1 BLOWER DAMPER SERVO SUB-ASSEMBLY (AIR INLET)

D

13.REPLACE NO. 1 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY (AIR OUTLET)
10.REPLACE NO. 1 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY (AIR MIX FOR DRIVER SIDE)
a.

Replace the No. 1 air conditioning radiator damper servo sub-assembly (air mix for driver side).

Click hereVehicle Interior>HEATING / AIR CONDITIONING>AIR CONDITIONING UNIT>DISASSEMBLY

HINT:

Since the servo motor cannot be inspected while it is removed from the vehicle, replace the servo motor with a new or a known good one and check that the condition returns to normal.



b.

Check for the DTC.

Body Electrical > Air Conditioner > Trouble Codes
50001 121
Result:
Result Proceed to
DTC B1497/97 is not output A
DTC B1497/97 is output B




A

END

B

14.REPLACE AIR CONDITIONING HARNESS ASSEMBLY
11.REPLACE NO. 2 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY (AIR MIX FOR FRONT PASSENGER SIDE)
a.

Replace the No. 2 air conditioning radiator damper servo sub-assembly (air mix for front passenger side).

Click hereVehicle Interior>HEATING / AIR CONDITIONING>AIR CONDITIONING UNIT>DISASSEMBLY

HINT:

Since the servo motor cannot be inspected while it is removed from the vehicle, replace the servo motor with a new or a known good one and check that the condition returns to normal.



b.

Check for the DTC.

Body Electrical > Air Conditioner > Trouble Codes
50001 121
Result:
Result Proceed to
DTC B1497/97 is not output A
DTC B1497/97 is output B




A

END

B

14.REPLACE AIR CONDITIONING HARNESS ASSEMBLY
12.REPLACE NO. 1 BLOWER DAMPER SERVO SUB-ASSEMBLY (AIR INLET)
a.

Replace the No. 1 blower damper servo sub-assembly (air inlet).

Click hereVehicle Interior>HEATING / AIR CONDITIONING>BLOWER UNIT>DISASSEMBLY

HINT:

Since the servo motor cannot be inspected while it is removed from the vehicle, replace the servo motor with a new or a known good one and check that the condition returns to normal.



b.

Check for the DTC.

Body Electrical > Air Conditioner > Trouble Codes
50001 121
Result:
Result Proceed to
DTC B1497/97 is not output A
DTC B1497/97 is output B




A

END

B

14.REPLACE AIR CONDITIONING HARNESS ASSEMBLY
13.REPLACE NO. 1 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY (AIR OUTLET)
a.

Replace the No. 1 air conditioning radiator damper servo sub-assembly (air outlet).

Click hereVehicle Interior>HEATING / AIR CONDITIONING>AIR CONDITIONING UNIT>DISASSEMBLY

HINT:

Since the servo motor cannot be inspected while it is removed from the vehicle, replace the servo motor with a new or a known good one and check that the condition returns to normal.



b.

Check for the DTC.

Body Electrical > Air Conditioner > Trouble Codes
50001 121
Result:
Result Proceed to
DTC B1497/97 is not output A
DTC B1497/97 is output B




A

END

B

14.REPLACE AIR CONDITIONING HARNESS ASSEMBLY
14.REPLACE AIR CONDITIONING HARNESS ASSEMBLY
a.

Replace the air conditioning harness assembly.

Click hereVehicle Interior>HEATING / AIR CONDITIONING>AIR CONDITIONING UNIT>DISASSEMBLY

HINT:

Since the air conditioning harness assembly cannot be inspected while it is removed from the vehicle, replace the air conditioning harness assembly with a new or a known good one and check that the condition returns to normal.



b.

Check for the DTC.

Body Electrical > Air Conditioner > Trouble Codes
50001 121
Result:
Result Proceed to
DTC B1497/97 is not output A
DTC B1497/97 is output B




A

END

B

15.CHECK HARNESS AND CONNECTOR (POWER SOURCE CIRCUIT)
15.CHECK HARNESS AND CONNECTOR (POWER SOURCE CIRCUIT)
a.

Disconnect the I77 air conditioning amplifier assembly connector.


b.

Measure the voltage according to the value(s) in the table below.

Standard Voltage:
Tester Connection Condition Specified Condition
I77-21 (B) - Body ground Always 11 to 14 V



Result:
Proceed to
OK
NG



OK

REPLACE AIR CONDITIONING AMPLIFIER ASSEMBLY

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR