Home › Suspension › TIRE PRESSURE MONITORING › TIRE PRESSURE WARNING RECEIVER › from 2016.05
RM2030EQ _53 Suspension _052590 TIRE PRESSURE MONITORING _0254560 TIRE PRESSURE WARNING RECEIVER A

TIRE PRESSURE MONITORING  TIRE PRESSURE WARNING RECEIVER  REMOVAL  


CAUTION / NOTICE / HINT

NOTICE:

When replacing the tire pressure warning ECU and receiver, read the transmitter IDs stored in the old ECU using the GTS and write them down before removal.

Click hereSuspension>TIRE PRESSURE MONITORING>TIRE PRESSURE WARNING SYSTEM>DATA LIST / ACTIVE TEST


PROCEDURE

Hide 1.REMOVE REAR SEAT CUSHION ASSEMBLY

Hide 72693 2.REMOVE REAR SEAT CUSHION LOCK HOOK

Hide 3.REMOVE REAR SIDE SEATBACK ASSEMBLY LH

Hide 62332A 4.DISCONNECT REAR DOOR OPENING TRIM WEATHERSTRIP LH

Hide 62472A 5.REMOVE ROOF SIDE INNER GARNISH LH

Hide 89760C 6.REMOVE TIRE PRESSURE WARNING ECU AND RECEIVER

NOTICE:
·

Do not drop, strike or otherwise subject the tire pressure warning ECU and receiver to impact.

·

If the tire pressure warning ECU and receiver is subjected to an impact, replace it with a new one.



a.
C277193

Remove the bolt.


b.

Disengage the 2 guides.


c.
C236171

Disconnect the connector to remove the tire pressure warning ECU and receiver.