Home › Engine / Hybrid System › 2AR-FXE COOLING › THERMOSTAT
RM2040EQ _51 Engine / Hybrid System _014697 2AR-FXE COOLING _0074931 THERMOSTAT A

2AR-FXE COOLING  THERMOSTAT  INSTALLATION  


PROCEDURE

Hide 16031 1.INSTALL WATER INLET WITH THERMOSTAT SUB-ASSEMBLY

a.

Install a new gasket on the water inlet with thermostat sub-assembly.


b.

Install the water inlet with thermostat sub-assembly with the 2 bolts.

Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)


Hide 16283 2.CONNECT NO. 6 WATER BY-PASS HOSE

a.

Connect the No. 6 water by-pass hose.


Hide 11452 4.INSTALL ENGINE OIL LEVEL DIPSTICK GUIDE

Hide 6.INSPECT FOR COOLANT LEAK (for Engine)