Home › Drivetrain › P314 HYBRID TRANSMISSION / TRANSAXLE › TRANSMISSION CONTROL CABLE
RM2040EQ _52 Drivetrain _014701 P314 HYBRID TRANSMISSION / TRANSAXLE _0074948 TRANSMISSION CONTROL CABLE A

P314 HYBRID TRANSMISSION / TRANSAXLE  TRANSMISSION CONTROL CABLE  REMOVAL  


PROCEDURE

Hide 53295E 1.REMOVE COOL AIR INTAKE DUCT SEAL

Hide 17750A 2.REMOVE INLET AIR CLEANER ASSEMBLY

Hide 3.REMOVE AIR CLEANER CAP SUB-ASSEMBLY

Hide 17801 4.REMOVE AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY

Hide 5.REMOVE AIR CLEANER CASE SUB-ASSEMBLY

Hide 33820B 7.REMOVE TRANSMISSION CONTROL CABLE ASSEMBLY

a.

Move the shift lever to N.


b.
C240495

Disconnect the end of transmission control cable assembly from the lower shift lever assembly.


c.

Disengage the 2 claws and disconnect the transmission control cable assembly from the lower shift lever assembly.


d.
A268022

Remove the nut and disconnect the transmission control cable assembly from the control shaft lever.


e.

Using a screwdriver, disengage the 4 claws and disconnect the transmission control cable assembly with clip from the No. 1 transmission control cable bracket.


f.

Remove the clip from the transmission control cable assembly.


g.
C243612

Disconnect the transmission control cable assembly from the 2 transmission control cable brackets.


h.
C241623C05
0.958,1.823 1.323,1.615 1.323,1.615 1.469,1.615 true 2.552,1.24 2.792,0.729 2.792,0.729 2.948,0.729 true 1.5,1.531 1.719,1.708 0.219,0.177 10 false *2 2.969,0.646 3.188,0.823 0.219,0.177 10 false *1
*1 No. 1 Parking Brake Cable Assembly
*2 Transmission Control Cable Assembly


Remove the bolt and disconnect the No. 1 parking brake cable assembly from the body.


i.

Turn back the dash panel insulator.


j.

Remove the 2 bolts and pull out the transmission control cable assembly from the body.