Home › Audio / Visual / Telematics › PARK ASSIST / MONITORING › CLEARANCE SONAR MAIN SWITCH
RM2040EQ _56 Audio / Visual / Telematics _014718 PARK ASSIST / MONITORING _0075034 CLEARANCE SONAR MAIN SWITCH A

PARK ASSIST / MONITORING  CLEARANCE SONAR MAIN SWITCH  INSTALLATION  


PROCEDURE

Hide 84490A 1.INSTALL BACK SONAR OR CLEARANCE SONAR SWITCH ASSEMBLY

a.

Engage the 2 claws to install the back sonar or clearance sonar switch assembly.


Hide 55410C 2.INSTALL INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY

Hide 55670 3.INSTALL NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY

Hide 55431B 4.INSTALL UPPER INSTRUMENT PANEL FINISH PANEL

Hide 55317A 5.INSTALL INSTRUMENT SIDE PANEL RH

Hide 62311B 6.INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP RH

Hide 7.CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION


Hide 64718C 8.INSTALL LUGGAGE TRIM SERVICE HOLE COVER