Home › Vehicle Interior › METER / GAUGE / DISPLAY › COMBINATION METER › 2012.02–2015.04
RM2040EQ _58 Vehicle Interior _014725 METER / GAUGE / DISPLAY _0075075 COMBINATION METER A

METER / GAUGE / DISPLAY  COMBINATION METER  INSTALLATION  


PROCEDURE

Hide 83100 1.INSTALL COMBINATION METER ASSEMBLY

a.

Connect the 2 connectors.


b.

Engage the wire harness clamp.


c.

Install the combination meter assembly with the 4 screws.


Hide 55410C 2.INSTALL INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY

Hide 55670 3.INSTALL NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY

Hide 55431B 4.INSTALL UPPER INSTRUMENT PANEL FINISH PANEL

Hide 55317A 5.INSTALL INSTRUMENT SIDE PANEL RH

Hide 62311B 6.INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP RH

Hide 7.CONNECT CABLE TO AUXILIARY BATTERY NEGATIVE TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION


Hide 64718C 8.INSTALL LUGGAGE TRIM SERVICE HOLE COVER