Home › Vehicle Exterior › DOOR / HATCH › LUGGAGE DOOR LOCK CONTROL CABLE ASSEMBLY
RM2040EQ _59 Vehicle Exterior _014735 DOOR / HATCH _0075155 LUGGAGE DOOR LOCK CONTROL CABLE ASSEMBLY A

DOOR / HATCH  LUGGAGE DOOR LOCK CONTROL CABLE ASSEMBLY  INSTALLATION  


PROCEDURE

Hide 64607 1.INSTALL LUGGAGE DOOR LOCK CONTROL CABLE SUB-ASSEMBLY

a.

Engage the 10 clamps and install the luggage door lock control cable sub-assembly.


b.

Engage the 2 clamps and connect the luggage door lock control cable sub-assembly.


c.

Connect the luggage door lock control cable sub-assembly.


d.
B283879

Engage the guide as shown in the illustration.


e.
B281716C04
1.667,1.698 1.417,1.896 1.417,1.896 2.125,1.688 false 0.948,1.698 0.781,1.917 false 0.906,1.635 1.146,1.427 false 1.229,1.813 1.531,2.156 0.302,0.344 10 *1 1.167,1.302 1.49,1.552 0.323,0.25 10 *3 0.656,1.917 0.927,2.198 0.271,0.281 10 *2 1.052,0.979 1.333,1.26 0.281,0.281 10 a 1.302,0.417 1.563,0.688 0.26,0.271 10 b
*1 Tape
*2 Fuel Lid Lock Control Cable Sub-assembly
*3 Luggage Door Lock Control Cable Sub-assembly


Install the luggage door lock control cable sub-assembly to the fuel lid lock control cable sub-assembly with the 2 pieces of tape as shown in the illustration.

Reference Measurement
Area Measurement
a 295 to 305 mm (11.6 to 12.0 in.)
b 935 to 955 mm (36.8 to 37.6 in.)

NOTICE:
·

Wrap tape around the designated positions 1 to 3 times.

·

Make sure that the fuel lid lock control cable sub-assembly and luggage door lock control cable sub-assembly are not kinked.




f.

Return the floor carpet to the original position.


g.

Engage the 2 clamps and install the 2 scuff plate clips.


h.

Engage the 3 clamps and connect the wire harness.


Hide 77306 2.INSTALL FUEL LID LOCK OPEN LEVER SUB-ASSEMBLY

a.
B281745C05
1.896,1.958 2.219,1.688 false 2.802,1.354 2.333,1.594 false 1.781,1.99 2.115,2.177 0.333,0.188 10 false *1 2.833,1.271 3.125,1.5 0.292,0.229 10 false *2
*1 Luggage Door Lock Control Cable Sub-assembly
*2 Fuel Lid Lock Control Cable Sub-assembly


Connect the fuel lid lock control cable sub-assembly and luggage door lock control cable sub-assembly to the fuel lid lock open lever sub-assembly.


b.
B281749

Engage the guide and install the fuel lid lock open lever sub-assembly as shown in the illustration.


c.

Install the screw.


Hide 64721 3.INSTALL LUGGAGE COMPARTMENT INNER TRIM COVER RH

Hide 64725D 4.INSTALL NO. 1 LUGGAGE COMPARTMENT TRIM HOOK

a.
B287058C02
2.083,2.323 1.615,2.469 true 1.406,2.396 1.573,2.552 0.167,0.156 10 *1
*1 Pin


Engage the pin to install the No. 1 luggage compartment trim hook.


Hide 64717A 5.INSTALL LUGGAGE COMPARTMENT FRONT TRIM COVER

Hide 58387 6.INSTALL REAR FLOOR FINISH PLATE

Hide 64711 7.INSTALL LUGGAGE COMPARTMENT FLOOR MAT

Hide 64719A 8.INSTALL LUGGAGE COMPARTMENT DOOR COVER

Hide 9.INSTALL REAR SIDE SEATBACK ASSEMBLY RH

Hide 72693 10.INSTALL REAR SEAT CUSHION LOCK HOOK

Hide 11.INSTALL REAR SEAT CUSHION ASSEMBLY

Hide 62413A 12.INSTALL CENTER PILLAR LOWER GARNISH RH

Hide 73210 13.CONNECT FRONT SEAT OUTER BELT ASSEMBLY RH

Hide 73233 14.INSTALL LAP BELT OUTER ANCHOR COVER

Hide 62331A 15.INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP RH

Hide 67917A 16.INSTALL REAR DOOR SCUFF PLATE RH

Hide 62311B 17.INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP RH

Hide 67913 18.INSTALL FRONT DOOR SCUFF PLATE RH