Home › Engine / Hybrid System › HYBRID / BATTERY CONTROL › BATTERY COOLING DUCT(w/ Filter) › 2015.04–2016.05
RM2040EQ _51 Engine / Hybrid System _014692 HYBRID / BATTERY CONTROL _0109199 BATTERY COOLING DUCT(w/ Filter) A

HYBRID / BATTERY CONTROL  BATTERY COOLING DUCT(w/ Filter)  REMOVAL  


PROCEDURE

Hide 1.REMOVE REAR SEAT CUSHION ASSEMBLY

Hide 72693 2.REMOVE REAR SEAT CUSHION LOCK HOOK

Hide 4.REMOVE REAR SIDE SEATBACK ASSEMBLY LH

Hide 5.REMOVE NO. 1 HYBRID BATTERY INTAKE FILTER

HINT:

If the message "Cooling performance of the hybrid battery is low Consult a dealer" is displayed on the multi-information display, inspect the No. 1 hybrid battery intake filter after removing it.

Click hereEngine / Hybrid System>HYBRID / BATTERY CONTROL>BATTERY COOLING DUCT(w/ Filter)>INSPECTION


a.
A308339C02
2.26,1.885 2.615,1.385 true 2.896,1.354 3.156,1.104 true 2.656,0.896 2.427,0.792 true 2.125,1.906 2.417,2.135 0.292,0.229 10 true *a 3.188,1.021 3.385,1.25 0.198,0.229 10 true *a 2.25,0.688 2.5,0.927 0.25,0.24 10 false *a
*a Tape


Remove the 3 pieces of tape shown in the illustration and remove the No. 1 hybrid battery intake filter from the No. 1 hybrid battery intake duct.