Home › Engine / Hybrid System › HYBRID / BATTERY CONTROL › HYBRID BATTERY SYSTEM › 2015.04–2016.05
RM2040EQ _51 Engine / Hybrid System _014692 HYBRID / BATTERY CONTROL _0074886 HYBRID BATTERY SYSTEM T

HYBRID / BATTERY CONTROL  HYBRID BATTERY SYSTEM  PROBLEM SYMPTOMS TABLE  


Hybrid Battery System
Symptom Suspected Area Link
"Cooling performance of the hybrid battery is low Consult a dealer" is displayed on the multi-information display.*1 1. Make sure the air intake port is not blocked. -
2. Make sure there are no gaps between the connecting parts of the ducts. -
3. Clean the No. 1 hybrid battery intake filter. Click here
4. Clear the DTCs to reset the learning values even if no DTCs are stored. Click here
Abnormal noise is heard from the ventilation holes in the rear side seatback assembly. 1. Make sure the air intake port is not blocked. -
2. Make sure there are no gaps between the connecting parts of the ducts. -
3. Clean the No. 1 hybrid battery intake filter.
Check for entry of foreign matter.
Click here

*1: If the battery cooling blower assembly malfunctions, DTC P0A8111, P0A8115 or P0A8196 will be stored. If only "Cooling performance of the hybrid battery is low Consult a dealer" is displayed on the multi-information display, perform the inspection of the HV battery cooling system intake port, filter and duct.