1.REMOVE REAR SEAT CUSHION ASSEMBLY
72693
2.REMOVE REAR SEAT CUSHION LOCK HOOK
3.SEPARATE REAR SEATBACK ASSEMBLY
4.REMOVE REAR SIDE SEATBACK ASSEMBLY LH
5.REMOVE NO. 1 HYBRID BATTERY INTAKE FILTER
If the message "Maintenance required for hybrid battery cooling parts at your dealer" is displayed on the multi-information display, inspect the No. 1 hybrid battery intake filter after removing it.
Click hereEngine / Hybrid System>HYBRID / BATTERY CONTROL>BATTERY COOLING DUCT(w/ Filter)>INSPECTION
| *a | Tape |
Remove the 3 pieces of tape shown in the illustration and remove the No. 1 hybrid battery intake filter from the No. 1 hybrid battery intake duct.