Home › Audio / Visual / Telematics › NAVIGATION / MULTI INFO DISPLAY › NAVIGATION SYSTEM (for Navigation Receiver Type)

DTC    B15F6    Main Body ECU Vehicle Information Reading/Writing Process Malfunction

for Preparation Click here


DESCRIPTION

This DTC is stored when items controlled by the main body ECU (multiplex network body ECU) cannot be customized via the navigation system vehicle customization screen.

HINT:
The main body ECU (multiplex network body ECU) controls the items for the following systems that are customizable via the navigation system vehicle customization screen:
  1. Power door lock control system
  2. Wireless door lock control system
  3. Lighting system (for Interior)
  4. Lighting system (for Exterior)


DTC No.
DTC Detection Condition
Trouble Area
B15F6
Main body ECU (multiplex network body ECU) vehicle setting processing malfunction
  1. CAN communication system
  2. Power door lock control system
  3. Wireless door lock control system
  4. Lighting system (for Interior)
  5. Lighting system (for Exterior)
  6. Main body ECU (multiplex network body ECU)
  7. Navigation receiver assembly

INSPECTION PROCEDURE

1.CHECK CAN COMMUNICATION SYSTEM
  1. Use the GTS to check if the CAN communication system is functioning normally (Click here).

    OK:
    CAN communication DTCs are not output.



NG
GO TO CAN COMMUNICATION SYSTEM (Click here)
OK


2.CHECK POWER DOOR LOCK CONTROL SYSTEM
  1. Check if the power door lock control system is malfunctioning (Click here).

    HINT:
    Customization may not be possible depending on the malfunction in the power door lock control system.

    OK:
    No malfunctions are present in the power door lock control system.



NG
GO TO POWER DOOR LOCK CONTROL SYSTEM (Click here)
OK


3.CHECK WIRELESS DOOR LOCK CONTROL SYSTEM
  1. w/ Smart Entry and Start System:
    Check if the wireless door lock control system is malfunctioning (Click here).
    w/o Smart Entry and Start System:
    Check if the wireless door lock control system is malfunctioning (Click here).

    HINT:
    Customization may not be possible depending on the malfunction in the wireless door lock control system.

    OK:
    No malfunctions are present in the wireless door lock control system.

    Result:
    Result
    Proceed to
    OK
    A
    NG (w/ Smart Entry and Start System)
    B
    NG (w/o Smart Entry and Start System)
    C



B
GO TO WIRELESS DOOR LOCK CONTROL SYSTEM (w/ Smart Entry and Start System) (Click here)

C
GO TO WIRELESS DOOR LOCK CONTROL SYSTEM (w/o Smart Entry and Start System) (Click here)
A


4.CHECK LIGHTING SYSTEM (for Interior)
  1. Check if the lighting system (for Interior) is malfunctioning (Click here).

    HINT:
    Customization may not be possible depending on the malfunction in the lighting system (for Interior).

    OK:
    No malfunctions are present in the lighting system (for Interior).



NG
GO TO LIGHTING SYSTEM (for Interior) (Click here)
OK


5.CHECK LIGHTING SYSTEM (for Exterior)
  1. Check if the lighting system (for Exterior) is malfunctioning (Click here).

    HINT:
    Customization may not be possible depending on the malfunction in the lighting system (for Exterior).

    OK:
    No malfunctions are present in the lighting system (for Exterior).



NG
GO TO LIGHTING SYSTEM (for Exterior) (Click here)
OK


6.CHECK CUSTOMIZE ITEMS
  1. Make a note of the customizable items for each main body ECU (multiplex network body ECU) related system.

    HINT:
    The items shown as customizable via the navigation system vehicle customization screen can also be changed using the GTS. In the following steps, the GTS will be used.

    1. To match-up the items on the navigation system vehicle customization screen with the items on the GTS, check the customize parameters list for the power door lock control system related items that can be customized via the navigation system vehicle customization screen (Click here).

    2. To match-up the items on the navigation system vehicle customization screen with the items on the GTS, check the customize parameters list for the wireless door lock control system (w/ Smart Entry and Start System) related items that can be customized via the navigation system vehicle customization screen (Click here).

    3. To match-up the items on the navigation system vehicle customization screen with the items on the GTS, check the customize parameters list for the wireless door lock control system (w/o Smart Entry and Start System) related items that can be customized via the navigation system vehicle customization screen (Click here).

    4. To match-up the items on the navigation system vehicle customization screen with the items on the GTS, check the customize parameters list for the lighting system (for Interior) related items that can be customized via the navigation system vehicle customization screen (Click here).

    5. To match-up the items on the navigation system vehicle customization screen with the items on the GTS, check the customize parameters list for the lighting system (for Exterior) related items that can be customized via the navigation system vehicle customization screen (Click here).

  1. Using the GTS, check that it is possible to change the settings of the customize parameters that are available for customization via the navigation system vehicle customization screen.

    OK:
    The items available for customization via the navigation system vehicle customization screen can be customized successfully using the GTS.

    Result:
    Result
    Proceed to
    NG
    A
    OK (for TMMK Made)
    B
    OK (for TMC Made)
    C



B
REPLACE NAVIGATION RECEIVER ASSEMBLY (for TMMK Made) (Click here)

C
REPLACE NAVIGATION RECEIVER ASSEMBLY (for TMC Made) (Click here)
A

REPLACE MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU) (Click here)