FRONT SEAT SIDE AIRBAG ASSEMBLY (for TMMK Made) > REMOVAL |
| 1. REMOVE FRONT SEAT ASSEMBLY (for Manual Seat) |
| 2. REMOVE FRONT SEAT ASSEMBLY (for Power Seat) |
| 3. DISCONNECT AIRBAG WIRE HARNESS (for Manual Seat) |
![]() |
Disconnect the 2 rubber bands of the separate type front seatback cover with pad.
![]() |
Disengage the claw and 3 clamps to disconnect the airbag wire harness.
| 4. DISCONNECT AIRBAG WIRE HARNESS (for Power Seat) |
![]() |
Disconnect the 2 rubber bands of the separate type front seatback cover with pad.
![]() |
Disconnect the connector (A).
Disengage the clamp (B).
Disengage the claw (D) and 3 clamps (C) to disconnect the airbag wire harness.
w/ Seat Heater System:
Disconnect the connector (E).
Disengage the clamp (F).
| 5. REMOVE SEPARATE TYPE FRONT SEATBACK COVER WITH PAD (for Manual Seat) |
![]() |
Disengage the hook.
![]() |
Disengage the 2 fasteners.
![]() |
Turn back the separate type front seatback cover.
![]() |
Disengage the 2 hooks.
![]() |
Disengage the 4 claws and remove the 2 front seat headrest supports.
![]() |
Remove the separate type front seatback cover with pad.
| 6. REMOVE SEPARATE TYPE FRONT SEATBACK COVER WITH PAD (for Power Seat) |
![]() |
Disengage the hook.
![]() |
Disengage the 2 fasteners.
![]() |
Turn back the separate type front seatback cover.
![]() |
Disengage the 2 hooks.
![]() |
Disengage the 4 claws and remove the 2 front seat headrest supports.
![]() |
Remove the separate type front seatback cover with pad.
| 7. REMOVE FRONT SEAT AIRBAG ASSEMBLY |
![]() |
Disengage the 2 clamps.
Remove the 2 nuts and the front seat airbag assembly.