Home › Engine / Hybrid System › 2GR-FKS (ENGINE CONTROL) › CAMSHAFT OIL CONTROL SOLENOID
RM33A0E _51 Engine / Hybrid System _065332 2GR-FKS ENGINE CONTROL _0326376 CAMSHAFT OIL CONTROL SOLENOID A

2GR-FKS ENGINE CONTROL  CAMSHAFT OIL CONTROL SOLENOID  INSTALLATION  


PROCEDURE

Hide 15370 1.INSTALL CAMSHAFT TIMING OIL CONTROL SOLENOID ASSEMBLY (for Intake Side of Bank 2)

a.
A394294C01
1.219,0.979 1.99,1.781 1.99,1.781 2.844,0.979 true 1.938,1.781 2.25,1.938 0.313,0.156 10 false *1
*1 O-ring


Apply engine oil to a new O-ring and install it to the camshaft timing oil control solenoid assembly as shown in the illustration.

NOTICE:

Do not damage the O-ring.



b.
A192239C95
1.49,1.938 1.781,1.938 1.781,1.938 1.865,1.583 false 1.323,1.844 1.635,2 0.313,0.156 10 false *a
*a Adhesive


Apply adhesive to 2 or 3 threads of 2 new bolts.

Adhesive:

Toyota Genuine Adhesive 1324, Three Bond 1324 or equivalent



c.

Install the camshaft timing oil control solenoid assembly to the timing chain cover assembly with the 2 bolts.

Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)

NOTICE:
·

If the camshaft timing oil control solenoid assembly has been struck or dropped, replace it.

·

Make sure that the O-ring is not cracked or moved out of place when installing the camshaft timing oil control solenoid assembly.




d.

Connect the camshaft timing oil control solenoid assembly connector.


Hide 2.INSTALL ENGINE ASSEMBLY WITH TRANSAXLE

Hide 15370 3.INSTALL CAMSHAFT TIMING OIL CONTROL SOLENOID ASSEMBLY (for Exhaust Side of Bank 1)

a.
A394294C01
1.219,0.979 1.99,1.781 1.99,1.781 2.844,0.979 true 1.938,1.781 2.25,1.938 0.313,0.156 10 false *1
*1 O-ring


Apply engine oil to a new O-ring and install it to the camshaft timing oil control solenoid assembly as shown in the illustration.

NOTICE:

Do not damage the O-ring.



b.
A192239C95
1.49,1.938 1.781,1.938 1.781,1.938 1.865,1.583 false 1.323,1.844 1.635,2 0.313,0.156 10 false *a
*a Adhesive


Apply adhesive to 2 or 3 threads of 2 new bolts.

Adhesive:

Toyota Genuine Adhesive 1324, Three Bond 1324 or equivalent



c.

Install the camshaft timing oil control solenoid assembly to the timing chain cover assembly with the 2 bolts.

Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)

NOTICE:
·

If the camshaft timing oil control solenoid assembly has been struck or dropped, replace it.

·

Make sure that the O-ring is not cracked or moved out of place when installing the camshaft timing oil control solenoid assembly.




d.

Connect the camshaft timing oil control solenoid assembly connector.


Hide 53736 4.INSTALL FRONT FENDER APRON SEAL RH

Hide 15370 5.INSTALL CAMSHAFT TIMING OIL CONTROL SOLENOID ASSEMBLY (for Intake Side of Bank 1)

a.
A394294C01
1.219,0.979 1.99,1.781 1.99,1.781 2.844,0.979 true 1.938,1.781 2.25,1.938 0.313,0.156 10 false *1
*1 O-ring


Apply engine oil to a new O-ring and install it to the camshaft timing oil control solenoid assembly as shown in the illustration.

NOTICE:

Do not damage the O-ring.



b.
A192239C95
1.49,1.938 1.781,1.938 1.781,1.938 1.865,1.583 false 1.323,1.844 1.635,2 0.313,0.156 10 false *a
*a Adhesive


Apply adhesive to 2 or 3 threads of 2 new bolts.

Adhesive:

Toyota Genuine Adhesive 1324, Three Bond 1324 or equivalent



c.

Install the camshaft timing oil control solenoid assembly to the timing chain cover assembly with the 2 bolts.

Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)

NOTICE:
·

If the camshaft timing oil control solenoid assembly has been struck or dropped, replace it.

·

Make sure that the O-ring is not cracked or moved out of place when installing the camshaft timing oil control solenoid assembly.




d.

Engage the clamp to connect the engine wire.


e.

Connect the camshaft timing oil control solenoid assembly connector.


Hide 15370 6.INSTALL CAMSHAFT TIMING OIL CONTROL SOLENOID ASSEMBLY (for Exhaust Side of Bank 2)

a.
A394294C01
1.219,0.979 1.99,1.781 1.99,1.781 2.844,0.979 true 1.938,1.781 2.25,1.938 0.313,0.156 10 false *1
*1 O-ring


Apply engine oil to a new O-ring and install it to the camshaft timing oil control solenoid assembly as shown in the illustration.

NOTICE:

Do not damage the O-ring.



b.
A192239C95
1.49,1.938 1.781,1.938 1.781,1.938 1.865,1.583 false 1.323,1.844 1.635,2 0.313,0.156 10 false *a
*a Adhesive


Apply adhesive to 2 or 3 threads of 2 new bolts.

Adhesive:

Toyota Genuine Adhesive 1324, Three Bond 1324 or equivalent



c.

Install the camshaft timing oil control solenoid assembly to the timing chain cover assembly with the 2 bolts.

Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)

NOTICE:
·

If the camshaft timing oil control solenoid assembly has been struck or dropped, replace it.

·

Make sure that the O-ring is not cracked or moved out of place when installing the camshaft timing oil control solenoid assembly.




d.

Connect the camshaft timing oil control solenoid assembly connector.


Hide 7.INSPECT FOR ENGINE OIL LEAK

Hide 11209 8.INSTALL V-BANK COVER SUB-ASSEMBLY