Home › Engine / Hybrid System › 2GR-FKS (ENGINE CONTROL) › ACTIVE CONTROL ENGINE MOUNT (for Front Side)
RM33A0E _51 Engine / Hybrid System _065332 2GR-FKS ENGINE CONTROL _0326379 ACTIVE CONTROL ENGINE MOUNT(for Front Side) A

2GR-FKS ENGINE CONTROL  ACTIVE CONTROL ENGINE MOUNT(for Front Side)  INSTALLATION  


PROCEDURE

Hide 12361A 1.INSTALL FRONT ENGINE MOUNTING INSULATOR

a.

Install the stay to the front engine mounting insulator with the nut.

Torque:
6.0 N*m (61 kgf*cm, 53 in.*lbf)


b.

Install the front engine mounting insulator to the front frame assembly with the 3 nuts.

Torque:
72 N*m (734 kgf*cm, 53 ft.*lbf)


c.
A405630N01
1.135,0.021 1.292,0.219 0.156,0.198 10 true A 0.802,0.771 0.958,0.969 0.156,0.198 10 true C 2.354,0.76 2.51,0.958 0.156,0.198 10 true B 1.396,1.438 1.552,1.635 0.156,0.198 10 true D

Install the front engine mounting bracket to the transaxle housing with the 3 bolts.

Torque:
Bolt (A), (B) and (C) : 42 N*m (428 kgf*cm, 31 ft.*lbf)

NOTICE:

Temporarily tighten the bolt (A), and then fully tighten the 3 bolts in the order of (B), (C) and (A).



d.

Install the front engine mounting bracket to the front engine mounting insulator with the bolt.

Torque:
Bolt (D) : 72 N*m (734 kgf*cm, 53 ft.*lbf)


e.

Connect the vacuum hose to the front engine mounting insulator.


f.

Engage the 2 clamps to install the vacuum hoses to the front engine mounting insulator.


Hide 51441 2.INSTALL NO. 1 ENGINE UNDER COVER

Hide 53852K 3.INSTALL FRONT WHEEL OPENING EXTENSION PAD LH

Hide 53851M 4.INSTALL FRONT WHEEL OPENING EXTENSION PAD RH

Hide 11209 5.INSTALL V-BANK COVER SUB-ASSEMBLY

Hide 17650H 6.INSTALL VACUUM SWITCHING VALVE (for Active Control Engine Mount System)