Home › Vehicle Interior › SEAT › FRONT POWER SEAT CONTROL SYSTEM (w/ Memory) › 2017.09–2018.04
RM33A0E _58 Vehicle Interior _065385 SEAT _0328606 FRONT POWER SEAT CONTROL SYSTEM(w/ Memory) J

SEAT  FRONT POWER SEAT CONTROL SYSTEM(w/ Memory)  Front Power Seat does not Operate with Front Power Seat Switch  


DESCRIPTION

Signals are input into the position control ECU assembly. The built-in ECU manages the signals received from the power seat switch and operates each motor. If the position control ECU assembly receives more than 2 motor operation signals for the same motor, the motor will be stopped. Manual operation resumes when the position control ECU assembly receives only 1 signal.

WIRING DIAGRAM

B480103E07
4.625,0.417 5.156,0.635 0.531,0.219 10 false a12 4.646,1.427 5.177,1.646 0.531,0.219 10 false a12 5.052,0.906 5.583,1.125 0.531,0.219 10 false +B 5.052,1.438 5.583,1.656 0.531,0.219 10 false IG 5.042,1.948 5.573,2.167 0.531,0.219 10 false SENG 5.042,2.469 5.573,2.688 0.531,0.219 10 false SLDR 5.042,2.99 5.573,3.208 0.531,0.219 10 false SLDF 5.042,3.5 5.573,3.719 0.531,0.219 10 false RCLR 5.042,4.01 5.573,4.229 0.531,0.219 10 false RCLF 5.042,4.521 5.573,4.74 0.531,0.219 10 false FRVU 5.052,5.042 5.583,5.26 0.531,0.219 10 false FRVD 5.052,5.563 5.583,5.781 0.531,0.219 10 false LFTU 5.042,6.094 5.573,6.313 0.531,0.219 10 false LFTD 5.063,6.604 5.594,6.823 0.531,0.219 10 false LFLF 5.063,7.104 5.594,7.323 0.531,0.219 10 false LFLR 2.646,4.427 3.177,4.646 0.531,0.219 10 false 7 2.635,4.948 3.167,5.167 0.531,0.219 10 false 6 2.646,5.448 3.177,5.667 0.531,0.219 10 false 8 2.646,5.99 3.177,6.208 0.531,0.219 10 false 3 2.646,6.479 3.177,6.698 0.531,0.219 10 false 17 2.635,7 3.167,7.219 0.531,0.219 10 false 14 0.667,7.771 1.198,7.99 0.531,0.219 10 false a8 0.667,7.938 3.156,8.229 2.49,0.292 10 false Front Power Seat Switch (Driver Seat) 4.615,7.948 6.583,8.354 1.969,0.406 10 false Position Control ECU Assembly (Driver Seat) 5.771,7.135 6.302,7.354 0.531,0.219 10 false GND 6.333,6.865 6.865,7.083 0.531,0.219 10 false 2 4.656,6.865 5.188,7.083 0.531,0.219 10 false 18 4.698,6.333 5.229,6.552 0.531,0.219 10 false 4 4.667,5.833 5.198,6.052 0.531,0.219 10 false 21 4.708,5.323 5.24,5.542 0.531,0.219 10 false 7 4.677,4.802 5.208,5.021 0.531,0.219 10 false 20 4.698,4.292 5.229,4.51 0.531,0.219 10 false 6 4.698,3.771 5.229,3.99 0.531,0.219 10 false 8 4.667,3.26 5.198,3.479 0.531,0.219 10 false 22 4.698,2.74 5.229,2.958 0.531,0.219 10 false 9 4.667,2.219 5.198,2.438 0.531,0.219 10 false 23 4.656,1.708 5.188,1.927 0.531,0.219 10 false 12 4.688,1.177 5.219,1.396 0.531,0.219 10 false 1 4.708,0.667 5.24,0.885 0.531,0.219 10 false 3 3.167,1.094 4.24,1.354 1.073,0.26 10 false P/SEAT F/R 3.063,1.615 4.167,1.865 1.104,0.25 10 false ECU-IG1 NO. 4 1.385,0.896 2.323,1.156 0.938,0.26 10 false from Battery 0.823,1.417 2.25,1.646 1.427,0.229 10 false from IG1-NO. 1 Relay 1.094,2.615 1.625,2.833 0.531,0.219 10 false E 0.813,2.615 1.344,2.833 0.531,0.219 10 false 11 2.385,7 2.917,7.219 0.531,0.219 10 false R 2.396,6.479 2.927,6.698 0.531,0.219 10 false H 2.115,5.979 2.646,6.198 0.531,0.219 10 false LDWN 2.24,5.448 2.771,5.667 0.531,0.219 10 false LUP 2.104,4.948 2.635,5.167 0.531,0.219 10 false FDWN 2.24,4.427 2.75,4.625 0.51,0.198 10 false FUP 2.646,3.906 3.177,4.125 0.531,0.219 10 false 9 2.635,3.406 3.167,3.625 0.531,0.219 10 false 10 2.646,2.865 3.177,3.083 0.531,0.219 10 false 4 2.635,2.354 3.167,2.573 0.531,0.219 10 false 5 6.25,7.125 6.781,7.344 0.531,0.219 10 false a10 4.635,1.938 5.167,2.156 0.531,0.219 10 false a12 4.635,2.469 5.167,2.688 0.531,0.219 10 false a12 4.635,2.99 5.167,3.208 0.531,0.219 10 false a12 4.635,3.5 5.167,3.719 0.531,0.219 10 false a12 4.625,4.021 5.156,4.24 0.531,0.219 10 false a12 4.635,4.531 5.167,4.75 0.531,0.219 10 false a12 4.635,5.042 5.167,5.26 0.531,0.219 10 false a12 4.635,5.563 5.167,5.781 0.531,0.219 10 false a12 4.646,6.073 5.177,6.292 0.531,0.219 10 false a12 4.625,6.604 5.156,6.823 0.531,0.219 10 false a12 4.625,7.115 5.156,7.333 0.531,0.219 10 false a12 2.167,3.906 2.698,4.125 0.531,0.219 10 false RCLF 2.146,3.396 2.677,3.615 0.531,0.219 10 false RCLR 2.167,2.865 2.698,3.083 0.531,0.219 10 false SLDF 2.146,2.354 2.677,2.573 0.531,0.219 10 false SLDR 3.073,0.563 4.302,0.865 1.229,0.302 10 false ECU-DCC NO. 2 1.385,0.385 2.323,0.646 0.938,0.26 10 false from Battery 4.646,0.156 5.177,0.375 0.531,0.219 10 false 15 4.635,0.917 5.167,1.135 0.531,0.219 10 false a10 5.052,0.406 5.583,0.625 0.531,0.219 10 false SYSB


CAUTION / NOTICE / HINT

NOTICE:

Inspect the fuses for circuits related to this system before performing the following procedure.


PROCEDURE

1.CHECK FRONT POWER SEAT OPERATION
a.

Check that each function of the power seat operates normally by using the front power seat switch (driver seat).

Click hereVehicle Interior>SEAT>FRONT POWER SEAT CONTROL SYSTEM (w/ Memory)>OPERATION CHECK


Result:
Result Proceed to
All power seat functions do not operate A
One or more power seat functions do not operate B



A

2.INSPECT FRONT POWER SEAT SWITCH (DRIVER SEAT)

B

GO TO OTHER DIAGNOSIS PROCEDURE (One or more Power Seat Motors do not Operate)

2.INSPECT FRONT POWER SEAT SWITCH (DRIVER SEAT)
a.

Remove the front power seat switch (driver seat).

Click hereVehicle Interior>SEAT>POWER SEAT SWITCH(for Front Side)>REMOVAL


b.

Inspect the front power seat switch (driver seat).

Click hereVehicle Interior>SEAT>POWER SEAT SWITCH(for Front Side)>INSPECTION


Result:
Proceed to
OK
NG



OK

3.CHECK HARNESS AND CONNECTOR (POSITION CONTROL ECU ASSEMBLY (DRIVER SEAT) - POWER SUPPLY)

NG

REPLACE FRONT POWER SEAT SWITCH (DRIVER SEAT)

3.CHECK HARNESS AND CONNECTOR (POSITION CONTROL ECU ASSEMBLY (DRIVER SEAT) - POWER SUPPLY)
a.

Disconnect the a10 and a12 position control ECU assembly (driver seat) connectors.


b.

Measure the voltage according to the value(s) in the table below.

Standard Voltage:
Tester Connection Condition Specified Condition
a10-3 (+B) - Body ground Always 11 to 14 V
a12-15 (SYSB) - Body ground Always 11 to 14 V
a12-1 (IG) - Body ground Engine switch on (IG) 11 to 14 V
a12-1 (IG) - Body ground Engine switch off Below 1 V



Result:
Proceed to
OK
NG



OK

4.CHECK HARNESS AND CONNECTOR (POSITION CONTROL ECU ASSEMBLY (DRIVER SEAT) - FRONT POWER SEAT SWITCH (DRIVER SEAT))

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

4.CHECK HARNESS AND CONNECTOR (POSITION CONTROL ECU ASSEMBLY (DRIVER SEAT) - FRONT POWER SEAT SWITCH (DRIVER SEAT))
a.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
a12-12 (SENG) - a8-11 (E) Always Below 1 Ω
a12-12 (SENG) or a8-11 (E) - Body ground Always 10 kΩ or higher



Result:
Proceed to
OK
NG



OK

5.CHECK HARNESS AND CONNECTOR (POSITION CONTROL ECU ASSEMBLY (DRIVER SEAT) - BODY GROUND)

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

5.CHECK HARNESS AND CONNECTOR (POSITION CONTROL ECU ASSEMBLY (DRIVER SEAT) - BODY GROUND)
a.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
a10-2 (GND) - Body ground Always Below 1 Ω



Result:
Proceed to
OK
NG



OK

REPLACE POSITION CONTROL ECU ASSEMBLY (DRIVER SEAT)

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR