Home › Engine / Hybrid System › 2GR-FKS (LUBRICATION) › OIL LEVEL SENSOR
RM33A0E _51 Engine / Hybrid System _065338 2GR-FKS LUBRICATION _0328792 OIL LEVEL SENSOR A

2GR-FKS LUBRICATION  OIL LEVEL SENSOR  INSTALLATION  


PROCEDURE

Hide 89491 1.INSTALL ENGINE OIL LEVEL SENSOR

a.

Install the engine oil level sensor to the oil pan sub-assembly with the 2 nuts.

Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)


b.

Install a new clip to the engine oil level sensor.


Hide 15104 2.INSTALL OIL STRAINER SUB-ASSEMBLY

Hide 12102A 3.INSTALL NO. 2 OIL PAN SUB-ASSEMBLY

Hide 4.REMOVE ENGINE ASSEMBLY FROM ENGINE STAND