Home › Engine / Hybrid System › 2AR-FE (LUBRICATION) › ENGINE OIL COOLER › 2017.09–2021.02
RM33A0E _51 Engine / Hybrid System _065329 2AR-FE LUBRICATION _0328798 ENGINE OIL COOLER A

2AR-FE LUBRICATION  ENGINE OIL COOLER  REMOVAL  


PROCEDURE

Hide 1.DRAIN ENGINE COOLANT

Hide 11452 3.REMOVE ENGINE OIL LEVEL DIPSTICK GUIDE

Hide 25051 4.REMOVE EXHAUST MANIFOLD CONVERTER SUB-ASSEMBLY (TWC: Front Catalyst)

Hide 15710 5.REMOVE OIL COOLER ASSEMBLY

a.
A409495C02
0.792,1.844 1,1.844 1,1.844 1.354,1.292 true 1.573,1.083 1.813,0.667 1.813,0.667 1.99,0.667 true 2.01,0.583 2.208,0.76 0.198,0.177 10 true *1 0.604,1.75 0.792,1.927 0.188,0.177 10 true *2
*1 Oil Cooler Union Bolt
*2 Seal Washer


Remove the oil cooler union bolt and seal washer.


b.

Remove the nut and oil cooler assembly from the water inlet housing.


c.

Remove the 3 gaskets from the oil cooler assembly.