Home › Engine / Hybrid System › 2GR-FKS (LUBRICATION) › ENGINE OIL COOLER › from 2017.12
RM33A0E _51 Engine / Hybrid System _065338 2GR-FKS LUBRICATION _0341584 ENGINE OIL COOLER A

2GR-FKS LUBRICATION  ENGINE OIL COOLER  REMOVAL  


PROCEDURE

Hide 1.DRAIN ENGINE COOLANT

Hide 17150 3.REMOVE EXHAUST MANIFOLD ASSEMBLY LH

Hide 15710 4.REMOVE OIL COOLER ASSEMBLY

a.
A368176

Remove the nut and hose clamp.


b.
A368177C01
1.125,0.302 1.344,0.302 1.344,0.302 1.708,0.698 true 1.948,1.042 2.396,1.396 2.396,1.396 2.688,1.396 true 0.938,0.219 1.135,0.417 0.198,0.198 10 true *1 2.729,1.281 2.917,1.5 0.188,0.219 10 true *2
*1 No. 4 Water By-pass Hose
*2 No. 5 Water By-pass Hose


Slide the 2 clips and disconnect the No. 4 water by-pass hose and No. 5 water by-pass hose from the oil cooler assembly.


c.
A368178

Remove the 2 bolts, 2 nuts and oil cooler assembly.


d.
A368179

Remove the 2 O-rings and No. 1 cylinder block insulator.