Home › Vehicle Interior › SEAT › REAR SEAT ASSEMBLY (for Fold Down Seat Type) › 2018.04–2021.02
RM33A0E _58 Vehicle Interior _065385 SEAT _0327858 REAR SEAT ASSEMBLY(for Fold Down Seat Type) A

SEAT  REAR SEAT ASSEMBLY(for Fold Down Seat Type)  INSTALLATION  


CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.


PROCEDURE

Hide 1.INSTALL REAR SIDE SEATBACK ASSEMBLY LH

a.

Place the rear side seatback assembly LH in the cabin.

NOTICE:

Be careful not to damage the vehicle body.



b.

Engage the hook and install the rear side seatback assembly LH with the bolt.

Torque:
18 N*m (184 kgf*cm, 13 ft.*lbf)


c.

w/ Rear Seat Side Airbag:

i.

Connect the connector.

1.

Before connecting the connector, check that the position of the white housing lock is correct as shown in the illustration.

B345877C05
3.01,2.594 3.01,2.656 3.01,2.656 3.448,2.656 false 3,1.229 3,1.292 3,1.292 3.438,1.292 false 6.104,0.948 6.104,1.167 6.104,1.167 6.302,1.167 false 6.135,2.375 6.135,2.594 6.135,2.594 6.333,2.594 false 5.771,2.083 6.5,2.083 true 5.833,0.583 6.563,0.583 true 1.417,0.5 2.167,0.5 true 1.417,1.833 1.979,1.833 true 0.969,0.708 1.281,0.906 0.313,0.198 10 false *a 4.448,0.708 4.76,0.906 0.313,0.198 10 false *a 0.969,2.052 1.281,2.25 0.313,0.198 10 false *b 4.458,2.052 4.771,2.25 0.313,0.198 10 false *b 3.521,1.198 3.833,1.396 0.313,0.198 10 false *c 6.375,1.083 6.688,1.281 0.313,0.198 10 false *c 6.396,2.5 6.708,2.698 0.313,0.198 10 false *c 3.51,2.552 3.896,2.698 0.385,0.146 10 false *c 6.635,0.5 6.948,0.698 0.313,0.198 10 false *d 6.552,2 6.865,2.198 0.313,0.198 10 false *d 1.25,0.406 1.563,0.604 0.313,0.198 10 false *d 1.25,1.74 1.563,1.938 0.313,0.198 10 false *d
*a Correct *b Incorrect
*c Yellow CPA *d White Housing Lock


2.

Be sure to engage the connectors until they are locked (when locking, make sure that a click sound can be heard).

NOTICE:
·

When connecting any airbag connector, take care not to damage the airbag wire harness.


·

When engaged, the white housing lock will slide. Be sure not to hold the white housing lock and upper part of the yellow CPA, as it may result in an insecure fit.






d.

Connect the rear seat outer belt LH to the rear seat shoulder belt guide LH.


Hide 62332A 2.CONNECT REAR DOOR OPENING TRIM WEATHERSTRIP LH

Hide 3.INSTALL REAR SIDE SEATBACK ASSEMBLY RH

HINT:

Use the same procedure as for the LH side.


Hide 62331A 4.CONNECT REAR DOOR OPENING TRIM WEATHERSTRIP RH

Hide 5.INSTALL REAR SEATBACK ASSEMBLY LH

a.

w/ Seat Heater System:

i.

Engage the clamp.



b.

Place the rear seatback assembly LH in the cabin.

NOTICE:

Be careful not to damage the vehicle body.



c.

Engage the 2 guides.


d.

Install the rear seatback assembly LH with the 2 bolts.

Torque:
36.8 N*m (375 kgf*cm, 27 ft.*lbf)


e.

Engage the fastener.


f.

Return the rear seatback assembly LH to its original position.


Hide 6.INSTALL REAR SEATBACK ASSEMBLY RH

a.

w/ Seat Heater System:

i.

Engage the clamp.



b.

Place the rear seatback assembly RH in the cabin.

NOTICE:

Be careful not to damage the vehicle body.



c.

Engage the 2 guides.


d.

Install the rear seatback assembly RH with the 2 bolts.

Torque:
36.8 N*m (375 kgf*cm, 27 ft.*lbf)


e.

Engage the fastener.


f.

Return the rear seatback assembly RH to its original position.


Hide 72693 7.INSTALL REAR SEAT CUSHION LOCK HOOK

a.
B470025C01
0,0 0,0 false
V113147

Install in this Direction


Engage the 2 claws to install a new rear seat cushion lock hook as shown in the illustration.

HINT:

Use the same procedure for the RH side and LH side.



Hide 8.INSTALL REAR SEAT CUSHION ASSEMBLY

a.

w/ Seat Heater System:

i.

Engage each clamp.


ii.

Connect each connector.



b.

Place the rear seat cushion assembly in the cabin.

NOTICE:

Be careful not to damage the vehicle body.



c.
B470027C01
1.188,0.531 1.458,0.375 true 2.417,0.708 2.688,0.552 true 0.542,1.5 0.729,1.344 true 1.958,1.917 2.146,1.76 true 1.75,1.844 1.958,2.052 0.208,0.208 10 true *a 1.479,0.292 1.677,0.469 0.198,0.177 10 true *b 2.708,0.49 2.906,0.667 0.198,0.177 10 true *b 0.344,1.438 0.552,1.646 0.208,0.208 10 true *a
*a Rear Seat Cushion Frame Hook (Front Side)
*b Rear Seat Cushion Frame Hook (Rear Side)
V113147

Install in this Direction (1)
V113148

Install in this Direction (2)


Engage the 2 rear seat cushion frame hooks on the rear side of the rear seat cushion assembly as shown in the illustration.


d.

Engage the 2 rear seat cushion frame hooks on the front side of the rear seat cushion assembly as shown in the illustration to install the rear seat cushion assembly.

NOTICE:

Confirm that the rear seat cushion assembly is securely installed.



Hide 9.INSTALL REAR SEAT HEADREST ASSEMBLY LH (w/ Removable Headrest)

a.

Install the rear seat headrest assembly LH.


Hide 10.INSTALL REAR SEAT HEADREST ASSEMBLY RH (w/ Removable Headrest)

a.

Install the rear seat headrest assembly RH.


Hide 73350C 11.CONNECT REAR CENTER SEAT OUTER BELT ASSEMBLY

a.
B491653C01
0,0 0,0 false
V113147

Install in this Direction


Connect the rear center seat outer belt assembly as shown in the illustration.


Hide 12.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL (w/ Rear Seat Side Airbag)

Hide 13. PERFORM DIAGNOSTIC SYSTEM CHECK (w/ Rear Seat Side Airbag)

Hide 14.INSPECT SRS WARNING LIGHT (w/ Rear Seat Side Airbag)

Hide 15.CHECK SEAT HEATER (w/ Seat Heater System)