Use the same procedure for the RH side and LH side.
The following procedure is for the LH side.
1.INSTALL OUTER MIRROR HOLE COVER ASSEMBLY (w/o Panoramic View Monitor System)
|
Install in this Direction |
Engage the guide and 5 claws to install the outer mirror hole cover assembly as shown in the illustration.
86790F
2.INSTALL SIDE TELEVISION CAMERA ASSEMBLY (w/ Panoramic View Monitor System)
3.INSTALL OUTER MIRROR HOLE COVER WITH SIDE TELEVISION CAMERA ASSEMBLY (w/ Panoramic View Monitor System)
| *a | Clamp |
| *b | Guide |
|
Install in this Direction |
Engage the guide and 5 claws to install the outer mirror hole cover with side television camera assembly as shown in the illustration.
Connect the connector.
Engage the clamp.
87945
4.INSTALL OUTER MIRROR COVER
|
Install in this Direction |
Engage the 3 guides and 8 claws to install the outer mirror cover as shown in the illustration.
87961
5.INSTALL OUTER MIRROR
6.PERFORM CALIBRATION (w/ Panoramic View Monitor System)