Home › Audio / Visual / Telematics › PARK ASSIST / MONITORING › TELEVISION CAMERA (for Front) › 2018.04–2021.02
RM33A0E _56 Audio / Visual / Telematics _065375 PARK ASSIST / MONITORING _0351444 TELEVISION CAMERA(for Front) A

PARK ASSIST / MONITORING  TELEVISION CAMERA(for Front)  REMOVAL  


CAUTION / NOTICE / HINT

The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during front television camera assembly removal/installation are shown below.

Necessary Procedure After Parts Removed/Installed/Replaced
Replaced Part or Performed Procedure Necessary Procedure Effect/Inoperative Function when Necessary Procedure not Performed Link
Front television camera assembly Front television camera view adjustment Panoramic view monitor system (Click here)

PROCEDURE

Hide 1.REMOVE FRONT BUMPER ASSEMBLY

Hide 86790B 2.REMOVE FRONT TELEVISION CAMERA ASSEMBLY

a.
E372119

Remove the 2 screws.


b.
E372120

Disengage the 2 guides to remove the front television camera assembly.