Home › Engine / Hybrid System › 6AR-FSE (STARTING) › STARTER › 2018.04–2021.02
RM33A0E _51 Engine / Hybrid System _072209 6AR-FSE STARTING _0351490 STARTER A

6AR-FSE STARTING  STARTER  INSTALLATION  


PROCEDURE

Hide 28100 1.INSTALL STARTER ASSEMBLY

a.

Install the starter assembly with the 2 bolts.

Torque:
46 N*m (469 kgf*cm, 34 ft.*lbf)


b.

Connect the starter assembly connector.


c.

Connect terminal 30 with the nut.

Torque:
9.8 N*m (100 kgf*cm, 87 in.*lbf)


d.

Install the terminal cap.


e.
A421295

Connect the transmission wire connector and rotate the lever and engage the claw.

HINT:

Rotate the lever until the claw of the transmission wire connector makes a click sound.



f.

Connect the wire harness with the 2 bolts.

Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)


Hide 74404A 2.INSTALL BATTERY CLAMP SUB-ASSEMBLY

Hide 4.INSTALL AIR CLEANER ASSEMBLY WITH AIR CLEANER HOSE

Hide 17750A 5.INSTALL INLET AIR CLEANER ASSEMBLY

Hide 53295E 6.INSTALL COOL AIR INTAKE DUCT SEAL

Hide 12601B 7.INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY