Home › Engine / Hybrid System › 6AR-FSE (ENGINE CONTROL) › CAMSHAFT POSITION SENSOR › 2018.04–2021.02
RM33A0E _51 Engine / Hybrid System _072203 6AR-FSE ENGINE CONTROL _0351516 CAMSHAFT POSITION SENSOR A

6AR-FSE ENGINE CONTROL  CAMSHAFT POSITION SENSOR  REMOVAL  


PROCEDURE

Hide 12601B 1.REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY

Hide 11102A 2.REMOVE CAMSHAFT POSITION SENSOR (for Exhaust Side)

a.
A413339

Disconnect the camshaft position sensor connector.


b.

Remove the bolt and camshaft position sensor from the cylinder head cover sub-assembly.

NOTICE:

If the camshaft position sensor has been struck or dropped, replace it.



Hide 17705 3.REMOVE AIR CLEANER CAP WITH AIR CLEANER HOSE

Hide 23881B 4.REMOVE FUEL HOSE BRACKET

a.
A413340

Remove the engine cover joint and fuel hose bracket from the EGR valve bracket.


Hide 11102A 6.REMOVE CAMSHAFT POSITION SENSOR (for Intake Side)

a.
A413342

Disconnect the camshaft position sensor connector.


b.

Remove the bolt and camshaft position sensor from the cylinder head cover sub-assembly.

NOTICE:

If the camshaft position sensor has been struck or dropped, replace it.