Home › Engine / Hybrid System › 6AR-FSE (LUBRICATION) › OIL LEVEL SENSOR › 2018.04–2021.02
RM33A0E _51 Engine / Hybrid System _072208 6AR-FSE LUBRICATION _0351651 OIL LEVEL SENSOR A

6AR-FSE LUBRICATION  OIL LEVEL SENSOR  INSTALLATION  


PROCEDURE

Hide 89491 1.INSTALL ENGINE OIL LEVEL SENSOR

a.

Install the engine oil level sensor with the 2 bolts.

Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)


b.

Engage the clamp.


c.

Install a new clip to the engine oil level sensor.


d.

Connect the engine oil level sensor connector.


Hide 12101 2.INSTALL OIL PAN SUB-ASSEMBLY

Hide 3.REMOVE ENGINE ASSEMBLY FROM ENGINE STAND