Home › Engine / Hybrid System › 6AR-FSE (FUEL) › FUEL PRESSURE REGULATOR › 2018.04–2021.02
RM33A0E _51 Engine / Hybrid System _072204 6AR-FSE FUEL _0353743 FUEL PRESSURE REGULATOR A

6AR-FSE FUEL  FUEL PRESSURE REGULATOR  INSTALLATION  


PROCEDURE

Hide 23280J 1.INSTALL FUEL PRESSURE REGULATOR ASSEMBLY

a.

Apply gasoline to 2 new O-rings and then install them to the fuel pressure regulator assembly.


b.

Install the fuel pressure regulator assembly to the fuel filter.

NOTICE:

Make sure that the O-rings are not cut or pinched during installation.



Hide 23220A 2.INSTALL FUEL PUMP WITH FILTER ASSEMBLY

Hide 83320 3.INSTALL FUEL SENDER GAUGE ASSEMBLY

Hide 77020A 4.INSTALL FUEL SUCTION TUBE WITH PUMP AND GAUGE ASSEMBLY